references: technology 43 



Briggs, C. A. Graphical study of railroad track scales and master scale perform* 

 ances. Scale Journ., June. 1916; Railway Rev., July 15, 1916. 



Bureau of Standards. Analyzed irons and steels. Methods of analysis. Bureau 

 of Standards Circular No. 14, 5th ed. Pp. 17. 1916. 



Bureau of Standards. Magnetic testing. Bureau of Standards Circular No. 

 17, 3d ed. Pp. 50. 1916. 



Bureau of Standards. Measurements for the household. Bureau of Standards 

 Circular No. 55. Pp. 149. 1915. 



Burgess, G. K., and Merica, P. D. Some j oreign specifications for railway mate- 

 rials: Rails, ivheels, axles, tires. Bureau of Standards Technologic Paper 

 No. 61. Pp. 132. 1916. 



Cain, J. R., and Cleaves, H. E. Determination of carbon in steels and irons by 

 direct combustion in oxygen at high temperatures. Bureau of Standards Tech- 

 nologic Paper No. 69. Pp. 10. 1916. 



Karr, C. P., and Rawdon, Henry S. Standard test specimens of zinc bronze 

 (Cu 88, Sn 10, Zn 2). Part I. — Preparation of specifications; Part II. — Micro- 

 structure. Bureau of Standards Technologic Paper No. 59. Pp. 67. 1916. 



Lewis, Walter S. Difference in weight between raw and clean wools. Bureau of 

 Standards Technologic Paper No. 57. Pp. 5. 1915. 



McCullom, B., and Ahlborn, G. H. Special studies in electrolysis mitigation. 



III. A report on conditions in Springfield, Ohio, loith insulated feeder system 

 installed. Bureau of Standards Technologic Paper No. 54. Pp. 64. 1916. 



McCullom, B., and Logan, K. H. Special studies in electrolysis mitigation. 



IV. A preliminary report on electrolysis mitigation in Elyria, Ohio, with 

 recommendations for mitigation. Bureau of Standards Technologic Paper 

 No. 55. Pp. 49. 1916. 



McCullom, B., and Ahlborn, G. H. Influence of frequency of alternating or in- 

 frequently reversed currents on electrolytic corrosion. Bureau of Standards 

 Technologic Paper No. 72. Pp. 31. 1916. 



Rosa, E. B., Brooks, H. B., McCullom, B., Canada, W. J., and Glading, F. 

 W. An investigation of enclosed cartridge fuses. Report of the Bureau of 

 Standards in the case of Economy Fuse and Manufacturing Co. vs. Under- 

 writers' Laboratories (Inc.), concerning the fire and accident hazard of the 

 Economy Refillable Fuse as compared with approved fuses. Bureau of Stand- 

 ards Technologic Paper No. 74. Pp. 199. 1916. 



Tuttle, J. B. Determination of barium carbonate and barium sulphate in vul- 

 canized goods. Bureau of Standards Technologic Paper No. 64. Pp. 5. 

 1916; Journ. Ind. and Eng. Chem., 8: 324. 1916; Chem. Eng., 23: 129. 1916; 

 Chem. Abs., 10: 1289. 1916. 



Waters, C. E., and Tuttle, J. B. Some qualitative tests for gum arabic and its 

 quantitative determination. Bureau of Standards Technologic Paper No. 

 67. Pp. 15. 1916; Journ. Ind. and Eng. Chem., 8: 413-416. 1916. 



Waters, C. E. Data on the oxidation of automobile cylinder oils. Bureau of 

 Standards Technologic Paper No. 73. Pp. 20. 1916; Journ. Ind. and Eng. 

 Chem., 8: 587-592. 1916. 



Wig, R. J., Williams, G. M., and Gates, E. R. Strength and other properties of 

 concretes as affected by materials and methods of preparation. Bureau of 

 Standards Technologic Paper No. 58. Pp. 172. 1916. 



