Some Indian Ways 447 



Fasten the end of a lo-foot cord to J and another to K; 

 hem a rope all along in the bottom, BCD. Cut 12 pieces 

 of rope each about 15 inches long, fasten one firmly to the 

 canvas at B, another at the point D, and the rest at regular 

 distances to the hem rope along the edge between, for peg 

 loops. The teepee cover is now made. 



For the door (some never use one) take a limber sapling 

 f inch thick and 5^ feet long, also one 22 inches long. Bend 

 the long one into a horseshoe and fasten the short one 

 across the ends (A in Cut II). On this stretch canvas, 

 leaving a flap at the top in the middle of which two 

 small holes are made (B, Cut II), so as to hang the door on 

 a lacing-pin. Nine of these lacing-pins are needed. They 

 are of smooth, round, straight, hard wood, a foot long and 

 I inch thick. Their way of skewering the two edges to- 

 gether is seen in the Omaha teepee at the end of the line 

 below. 



Ci>y le^-0 <■ '• «uufMt tC»""»> 



STORM CAP OR BULL-BOAT 



During long continued or heavy rains, a good deal of 

 water may come in the smoke vent or drip down the 

 poles. To prevent this the Missouri Indians would use 

 a circular bull-boat of rawhide on a frame of willows as 

 a storm cap. 



For a twelve-foot teepee the storm cap should be about 

 four feet across and eighteen inches deep, made of 



