HARDWOODRECORD 43 



You Can't Make Perfect 



Veneers 



with an imperfectly ground knife. To do the work properly the knife must 



have an absolutely straight, true edge. Instead of moving the knife back and 



forth, with the resulting overhang at the end of travel, the knife on the Coe 



Automatic Knife Grinder is held perfectly rigid on a knife bar which is one 



solid piece of iron, heavily reinforced and incapable of any spring. 



C. The stone does the traveling. 



C. This looks like the sensible and only proper mechanical way, doesn't it? 



C. The grinder mandrel runs on a heavy cross head, which slides between 



parallel planed ways. 



C This insures for the stone an exact and true line of travel, without end 

 play or vibration. 



C The Coe Knife Grinders are made in a number of sizes, and they will grind 

 any length of knife, from the shortest planer knife to a knife 168 inches in length. 

 Knives can be ground with either a straight or a concave bevel. The feed is 

 automatic, and can be adjusted from 1-1000 to 4-1000 of an inch. The grind- 

 ers weigh from 3,500 to 5,000 pounds. Our Catalog No. 5 illustrates and fully 

 describes them. 



THE 



Coe Manufacturing Co. 



105 Bernard Street 

 PAINESVILLE, OHIO, U. S. A. 



While we carry in stock, ready for immediate delivery, veneer machines of nearly every pattern and size mentioned in our 

 catalog, we yet wish to call PJSPECIAL ATTENTION to the following: 



VENEER SLICER 



This Slicer embodies all latest improvements, and will cut flitches of any size up to 12 feet 5 inches in length by 30x30 inches. 

 Knife and pressure bar can be adjusted tog<-ther or sipurahlv while machine is in operation- ami can be run back and forth 

 by power independently of feed gear. This machine has a capacity of from 20,000 to 100,000 surface feet per day of trn hours, 

 depending on dimensions of flitches and thicknesses cut- Will cut perfect stock up to | , Inch in oak. 



COE AUTOMATIC KNIFE GRINDER 



Will grind knives of any size, from the smallest planer knife up to a 100-inch veneer knife. Grinds straight or hollow bevel. 

 Feed can be adjusted from 1-1000 to 4-1000 of an inch, weight 1.500 pounds. 



COE ROTARY VENEER CUTTER 



Style "B"' extra heavy pattern, diameter of swing 50 inches. Any length of knife up to 100 inches. Diameter of spi:;. 

 inches, weight 36,000 pounds. 



COE VENEER CLIPPER 

 Style "A" heavy pattern, power or hand feed, or both. Length of knife 100 Inches, weight 5,500 pounds. 



We also have for sale one second-hand 90-inch St. Joe Veneer Lathe, and a St. Joe 90-inch Clipper. These machines were i n 

 use less than a year. They have been thoroughly overhauled and are in tirst-class condition. Both machines are equipped 

 with knives. 



