12 



HARDWOOD RECORD 



A Moulder With "Get-At-Able" Adjustments 



Neither an inside nor an outside machine but 

 a combination of the ^ood features of both 



Not many years ago, moulding run at 40 feet per 

 minute was considered the limit at which good work 

 could be produced. 



It's a fact that there are a good many moulders in 

 use today that do well to turn out even 20 feet a minute. 



One of our salesmen found this very condition ex- 

 isting in the factory of a large concern manufacturing 

 refrigerators. Walking through the factory with the 

 manager, they came across a moulder running about 40 

 feet a minute. The manager said he wanted to double 

 the output to meet his requirements. Our man looked 

 over, a piece as it came from the machine and said, "Mr. 

 Manager, that's pretty rough work for**'"'refrigerators. 

 We're making a moulder that I will guarantee to do 

 better work at 75 feet than you're now getting at 

 forty." 



The manager quickly figured he would be getting 

 double the output of better work with the same machine 

 crew — no increase in wage expense. That man has 

 had a No. I 08 running in his factory for several months. 



Perhaps conditions in your plant are similar — you 

 may not realize just what our No. 108 Open Side 

 Moulder will accomplish. 



As the illustration shows, it is open on the side, mak- 

 ing readily accessible all working parts and adjustments. 



The base is cast in one solid piece — no bolts or 

 girts to loosen or give. 



The feed rolls are 8 inches in diameter — more 

 powerful than those used on the average inside moulder. 



We've cut down the number of gears to nine. They 

 all run on shafts with babbitted boxes — no studs to give 

 you trouble. You can't run stock face down successfully 

 on an outside moulder — the lower cylinders and side 

 heads vibrate too much. But it's easy on the 108, be- 

 cause both the bottom cylinder and the side heads have 

 the direct support of the one-piece base. 



We've a large folder showing front, rear and 

 sectional views and which contains a complete description. 

 Better send in your request today — this may be just the 

 machine you're looking for. 



THE BERLIN MACHINE WORKS, BELOIT, WIS. 



BRANCH OFFICES: 



NEW YORK CHICAGO BOSTON NEW ORLEANS SPOKANE SEATTLE SAN FRANCISCO COLU M Bl A, S. C. 



