lO 



HARDWOOD RECORD 



A Different Rip Saw 



No. 30 Power Feed with Adjnstable Feed RoUi 

 A Machine of Exceptional Range and Capacity 



Especially Adapted for Sawing Short Stock 



On; piece frame. Four bearings for arbor, one of them outside 

 driving pulley, as shown, and one a removable outside bearing at 

 opposite end of arbor. Exceptionally positive and strong feed 

 works. The rolls are 6 mches in diameter, and are adjustable to 

 and from the saw, so that from I to 20 in. saws may be used, 

 ripping up to 6/i in. thick. Feed roll adjustment is entirely new. 

 The sliding head stock controlling feed is raised to any point with 

 one motion of crank, and controlled with ratchet. Tension of feed 

 chains is the same at all distances without adjustment. It has 

 many other good features, but we've no more room to describe 

 hem. 



WRITE FOR FULL DESCRIPTrON 



This is only one of the many superior machines we are building. If in need 

 of anything in the woodworking machinery line, it will pay you to investigate 

 our too/s before placing an order. Catalogue sent on 'request. 



HERMANCE MACHINE COMPANY 



WILLIAMSPORT, PA. 



CHICAGO REPRESENTATIVES: 



Chicago Machinery Exchange, 159-161 N. Canal Street, Chicago 



Chicago Machinery Exchange, 



(Incorporated) 



WOODWORKING MACHINERY MERCHANTS 



CHICAGO. ILLINOIS 



No. 35 SINGLE SURFACE PONY PLANER 



Planes 24 inches wide and 6 inches thick. Table slides on outside o 

 frame so it is steady and ihe work will not be wavy or have clipped off 

 ends. Two rateo of feed driven from cylinder, one rceulaiine the other. 



MOST PERFECT 



DOUBLE HEAD DOWEL MACHINE 



These machines have 

 two spindles running 

 side by side, both spin- 

 dles operated at the same 

 time and by the same 

 operator. Double No.l 

 cuts from Ji"in- to 1-in. 

 diameter; double No. 2 

 cuts up to 2-in. in di- 

 ameter; double No. 3 

 cuts up to 3-in. in di- 

 ameter. These machines 

 are designed for the 

 rapid production of 

 round rods for all pur- 

 poses, and have a 

 capacity of 7,000 feet per 

 hour and larger when 

 required. Waste stock 

 and every grade of stock 

 may be turned without 

 danger of it twisting off or 



Write for Circular describing these machines in detail 



CRESCENT MACHINE WORKS 



Manufacturers Patented and Improved Woodworking Machinery 



Grand Rapids, Michigan 



CHICAGO MACHINERY EXCHANGE, INC. 



WOODWORKING MACHINERY MERCHANTS 



159-161 N. Canal St. 



REPRESENTING EXCLUSIVELY 



BAXTER D. WHITNEY & SON. 

 HERMANCE MACHINE CO.. 



greaves. klusman & co.. 

 Mcdonough mfc. co.. 



PORTER MACHINERY CO.. 

 BtACB MFC. CO., 



CRESCENT MACHINE WORKS, 

 of Grand Rapids. 



Chicago, III. 



WEST SIDE IRON WORKS. 

 New Cfiicaso Line. 



