6o 



HARDWOOD RECORD 



Are You in the Market for a Self- Feed Rip and Edging Saw- 



A MACHINE DESIGNED TO MEET A WIDE RANGE OF REQUIREMENTS FOR GENERAL 

 RIPPING OR EDGING BOTH LONG OR SHORT STOCK? -IF SO, WRITE US ABOUT OUR 



No. 245 Self-Feed Rip and Edging Saw 



This machine combines the advantage of quick adjustment with an edging carriage producing a perfectly straight 

 edge as well as parallel work. It possesses another advantage, viz : that the section of the carriage track at the right 

 of the machine proper may be removed, converting the machine into a regular self-feed rip saw. 



FEED WORKS consisting of both power driven feed-in and feed-out rolls, is carried on a swinging frame which 



No. 



L'45 SELF -FEED RIP AND 

 EDGING SAW 



may be instantly raised or lowered by means of a lever, 

 either at the right of the main frame or in front of the 

 edging carriage. 



SAW MANDREL is carried on a swinging frame and 

 provided with a gravity belt tightener to keep belt at a 

 proper tension. 



The Mandrel Bearing is provided with adjustment for 

 aligning and is raised and lowered by means of a hand 

 wheel either at the front or side of the machine con- 

 venient to the operator, when working either as a rip 

 saw or an edger. 



EDGING CARRIAGE is mounted on rollers and 

 travels on planed tracks, insuring absolutely perfect edging 

 on material full lengths of carriage. 



WRITE FOR DESCRIPTIVE CIRCULAR 



J. A. FAY & EGAN COMPANY 



414-434 West Front St. 

 CINCINNATI, OHIO 



New Hoosier Improved Short Log Sawing Machine 



Made especially for sawing veneer cores 

 and small logs, up to 20 inches diameter and 

 from 2 to 12 feet long. 



The machine is built with a heavy cast 

 iron husk frame that carries the feed works 

 and mandrel which runs in self-oiling boxes. 

 It is equipped with a variable friction feed, 

 with cable attachment lo carriage. Feed is 

 strong and rapid. 9 



The dogs are of an entirely new style, and 

 dog the log, or piece to be sawed, in the end 

 instead of top and bottom, and can be in- 

 stantly changed to grip any length log that 

 the carriage will accommodate. 



The machine consists of but three pieces, the husk 

 frame, track frame and carriage. It can be quickly 

 and easily moved, and can be operated with a 10 H.P. 

 engine. The machine will saw from 3,000 to 6,000 

 feet per day and weighs 3,500 lbs. 



The largest saw that can be used is a 48-in. diameter. 



For further information, address : 



THE SINKER -DAVIS COMPANY, Indianapolis, Indiana 



