10 July, 1916.] 



Journal of Agriculture, Victoria. 



69098 



Modern Styles in 

 Working Heads 

 and Pump Jacks 



Fig. 69098 is a Deep Well Working Head 

 designed to meet the demand for a medium 

 priced head for power pumping from wells or 

 bores by means of belt drive from gasoline, oil 

 or steam engine, electric motor or line shaft. It 

 is of simple construction, all gearing is close to 

 the base, and the driving pully is located between 

 the two driving pinions. Two gears on one shaft 

 are connected to the crosshead by connecting 

 rods, and are driven by two pinions. The cross- 

 head is guided by two upright rotls, and is so 

 built that plunger and 

 rods can be taken from 

 tl:e wells without re- 

 moving the head — or 

 the head can be moved 

 with very little trouble. 

 Pamphlet of full particalars 

 mailed free. 



Will be exhibited at 

 forthcoming Royal Show 



Fig. 69493 is a geared pump jack for operating any 

 ordinary windmill pump head or standard by belt drive. 

 Substantially constructed, supported by its own base, 

 and clamps to head or standard. Pinion is protected 

 by guard. The gears and plungers are so arranged that 

 the pitman moves vertically on the upstroke without 

 side-thrust. Adapted for hand, windmill, or engine- 

 power by changing one bolt and adjusting the pitman. 

 Gear ratio, 5 to i . Wrist pins are of steel. Fast and 

 loose pulleys measure 12 inches by 3 inches. Strokes : 

 6, 8. or 10 inch. 



Pamphlet giving full particulars mailed free. 



Makers of NVindmills, Pumps, 

 Troughs. Flumiri);. Tanks. Stands, &c. 



393-399 Bourke St., Melb. 



324-330 Pitt St.. Sydney. 



69493 



