l6-cm.0 TORQUE CABLE 



3¥r=f^J 



2 5-cm. 



SUSPENSION CABLE—C".^ 



9.5- mm. ♦ 

 SUSPENDER CABLE 



20-cm.* 

 TORQUE TUBE 



9.5 mm.- SIDE CABLE 



lO-CTi.X lO-cm. 

 X IIGA.TUBE 



TOP NETTING SUPPORT BAR 

 CENTER CARRIAGE FRAME 



-TRACK SUPPORT 

 ASSEMBLY 



FISH SCREEN 



1^' 



DRIVE CABLE 



■STIFF- LEG 



-TOP NETTING SUPPORT BAR 



FISH SCREEN 



Z3-cm.X7.6-cm.X 4.8-mm.TUeE 

 (TORQUE BOX) 



Figure 5. — Diagrammatic cross section of deflector and supporting structure. 



the transverse loads on the suspension struc- 

 ture caused by the water and wind load on the 

 structure and screens. The side cables consist 

 of 9.5-mm. zinc-coated 6-7 wire strand core 

 ropes. Turnbuckles in each cable allow adjust- 

 ment of the horizontal alignment of the torque 

 tube and the cable tension. 



The torque cables extend horizontally from 

 each side of the track support arms, spaced 

 at 6.1-m. intervals to anchors on the shore. 

 Torque cables consist of 15.9-mm. zinc- 



coated 6-7 strand core rope. Turnbuckles 

 provide for adjustment of cable tension. 



Track design and support . --The track sys- 

 tem, 78.0 m. in circumference (fig. 6), is 

 composed of a "V" track section formed of 

 5.1- by 5.1-cm. angle steel, 3.2 mm. thick, 

 welded openside down to the top surface of 

 the track support assembly. This provides the 

 45° angular running surface for the carriage 

 wheels. 



