304 FOREST PRODUCTS 



SPECIFICATIONS AND PRICES 



For commerical purposes, poles are classified by 5-ft. lengths, top 

 diameters, and sometimes by the diameter at a specified point, usually 

 6 ft. from the butt as in chestnut. The minimum length is generally 

 regarded as 20 ft. and from the poles run in 5-ft. lengths up to 75 ft. 

 or more for special purposes. Practically two-thirds of our poles are 

 from 20 to 30 ft. in length as these are the sizes most in demand. Only 

 about one-fifth are from 30 to 40 ft. in length, one-twentieth from 40 to 

 50 ft. and only i to 2 per cent exceed 50 ft. in length. 



The telegraph and telephone companies purchase about 75 per cent of 

 all the poles used. A good share of the remainder are purchased by the 

 electric railroad and the electric light and power companies. The steam 

 railroads purchase only about 6 per cent of all the poles. 



Specifications are prepared by the pole associations or by the tele- 

 phone, telegraph and other companies to classify the poles according 

 to dimensions, shape, freedom from defects and appearance. 



The following are the latest specifications of the Western Red Cedar 

 Association with headquarters at Spokane, Wash., for standard telephone, 

 telegraph and electric light poles, 20 ft. long and with 4-in. top diameter 

 and up. 



All poles must be cut from live, growing cedar timber, peeled, knots trimmed 

 close, butts and to pssawed square; tops must be sound and must measure as follows 

 in circumference; 



4-in. top 12 -in. circumference 



5-in. top 15 -in. circumference 

 6-in. top iSj-in. circumference 



7-in. top 22 -in. circumference 



8-in. top 25 -in. circumference 



g-in. top 28 -in. circumference 



lo-in. top 31 -in. circumference 



Crook. 



No pole shall have more than one crook, and this shall be one way only, the sweep 

 not to exceed i in. to every 6 ft. in length. Same to be determined in the following 

 manner: Measurement for sweep shall be taken as follows: That part of the pole when 

 in the ground (6 ft.) not being taken into account in arriving at sweep, lightly stretch 

 a tape line on the side of the pole where the sweep is greatest, from a point 6 ft. from 

 butt to the upper surface at top, and having so done, measure widest point from 



