SELLINGLUMBER 425 



BEVEL SIDING. 



Sizes. Bevel Siding shall be made from stock S. 4 S. 

 worked to 13/16 of an inch by 3*/2 and 5^ and resawed on 

 a bevel. 



Lengths. Standard lengths 4 to 20 feet. Five per cent of 

 8 or 9 feet is allowed in mixed length shipments of "B" and 

 Better Bevel Siding, and in addition 5 per cent of 6 or 7 feet 

 in No. 1 Common, and in addition 5 per cent of 4 or 5 feet in 

 No. 2 Common. 



(The above percentage is allowed in all shipments of mixed 

 lengths, even though the number of feet of each length be specific- 

 ally stated.) 



Grades: A, B, No. 1 and No. 2 Common. 



69. BEVEL SIDING shall be graded according to the 

 rules for Drop Siding, and will admit in addition slight imper- 

 fections on the thin edge, which will be covered by the lap 

 when laid' 2y 2 and 4^ inches to the weather. 



PARTITION. 



Sizes. Partition shall be worked to 24x3*4 and 5% inches. 

 Lengths. Same percentage of short lengths allowed as in 

 Ceilirig. 



Grades : A, B, No. 1 and No. 2 Common. 



70. PARTITION shall be graded according to Ceiling 

 rules, and must meet the requirements of the specified grades 

 on the face side only, but the reverse side shall not be more 

 than one grade lower, and shall not cause waste in No. 1 Com- 

 mon and Better. 



MOULDED CASING AND BASE, WINDOW AND DOOR 



JAMBS. 



Sizes of Moulded Casing and Base shall be worked to 24- 

 inch as per patterns shown in Southern Pine Association 

 Moulding Book, 1916 Edition. (See Sec. 34). (For widths of 

 Plain Casing, see Finishing S. 4 S.) 



WINDOW AND DOOR JAMBS, Dressed, Rabbeted and 

 Plowed as ordered. (See Sec. 34). 



Grades: A, B and C. 



71. "A" MOULDED CASING AND BASE must be prac- 

 tically free from defects on the face side and well manufac- 

 tured. 



