WALLS AND TRELLISES. 



171 



are none too close to have a bearing shoot on each. 

 When wire cannot be conveniently had, the follow 

 ing is a good mode of putting np a rough trellis. 



Set the posts as usual, and provide a number of 

 slender split poles (hoop poles) and also a sufficient 

 number of wire staples made of strong wire (No. 6 

 or 8 hard). Then secure the poles or slats to the 

 posts by means of the staples, the ends of the poles 

 being made to lap over each other so that two may 

 be fastened by one staple. The accompanying figure 

 (42) will explain this better than words can describe. 



Jig. 42. 



If the staples are a little less than the poles, thelatte 1 &quot; 

 will be held very firmly. Nails will not answer, an, 

 they are apt to split the poles, and we are inclined &amp;lt;* 

 think that, for ordinary slats, staples would be bette&amp;gt;- 

 than nails on this very account. If made square and 

 light, they need not be unsightly, and the cost is not 

 very great. 



No directions- need be given for the construction of 



