Application 



Inspection 



Erection 



Inspector's 



Authority 



B. &B. 

 Master 



Special 

 Ordinances 



23 



inches of free bristle. No brushes are to be used which have an overall length when 

 new, from tip of bristle to end of handles, exceeding 14 inches. 



239. The paint shall be of proper working consistency and each coat shall ^be 

 thoroughly brushed out and allowed to dry completely before the application of the next 

 coat. The paint shall be carefully worked into all joints and open spaces. 



240. No paint shall be used unless the containers bear the seal of the Inspector and 

 the Contractor has been notified that such paint is satisfactory for use. 



241. The Contractor shall allow the Inspector free access to all parts of the work at 

 all times, and will facilitate in every reasonable manner the Inspector's duties in en- 

 suring that all work is done in accordance with the plans and specifications. 



242. The Inspector on erection work is authorized to reject, at any time during the 

 progress of the work, any piece of material or any member which he may find defective 

 in any manner or not in accordance with the detail plans. This material may be re- 

 jected notwithstanding any previous acceptance, and any pieces so rejected shall be 

 replaced by the Contractor without extra charge. 



242A. All erection work being done at each bridge site shall be performed under the 

 supervision of the Bridge and Building Master. 



243A. The Contractor shall comply with all special or local ordinances or regulations 

 appertaining to the work, and shall protect the Railway Company against any claims 

 due to lack of compliance with such ordinances or regulations. 



APPROVED 



C. B. BROWN 



Engineering Assistant. 



W. A. DUFF 



Engineer of Standards. 



Office of Engineer of Standards, 

 Toronto, Ont. 



May 1, 1922. 



