HIGHWAY CROSSING. 



5. Holes shall be bored for all bolts. The depth of the hole and the diameter of the auger 

 to be specified by the engineer. 



(.. I iMiniiiK sh.ill be accurately fitted; no blocking or shimming will be allowed in making 

 joints. Timbers shall be cut off with the saw; no axe to be used. 



7. Joints and points of bearing, for which no fastening is shown on the plans, shall be fastened 

 as specified by the engineer. 



,'' 

 rJMStnnpr r&dmciny 



* ' 



i - 14-0"-^- 14-0"- 



'0'+-I4'-0'+~I4'-0- 



''Jif**- -Slept Hoi 



-l2>l2*l8-0"Cap 

 3>8'*20 ! 0"0race 

 >8 "16 -0 *CollarBrac 



Showing roadway -for dbvMt 



Zandf. 

 Showing roadway fo 

 track crossing. 



FIG. 10. HIGHWAY CROSSING. ILLINOIS CENTRAL RAILROAD. 



8. The engineer or his authorized agents shall have full power to cause any inferior work 

 to be condemned, and taken down or altered, at the expense of the contractor. Any material 

 destroyed by the contractor on account of inferior workmanship or carelessness of his men is to 

 be replaced by the contractor at his own expense. 



