SHOP DRAWINGS FOR OFFICE BUILDINGS. 



403 



Columns. Columns shall, whenever possible, be drawn standing up on the sheets as they 

 npp<-.ir in the building. If it becomes necessary to draw them lengthwise on the sheet, the base 

 shall IK- to UH- left. Particular attention shall be paid to establishing a marking system for 

 brackets, splir.--pl.iu-s, etc. A summary of all these standard pieces shall be made for each tier 



-1- 





(W Tie Rods Darn. 



/?// Wall Plates standard. 

 Top of Plate Girders in Wall 

 / above Floor Line. 



FIG. 12. FLOOR PLANS FOR OFFICE BUILDINGS. 



and sent to the shop as early as practicable, in order that they may be gotten out before the main 

 material is taken up. The material for the small pieces shall, as far as possible, be chosen from 

 stock sizes. Columns shall be marked with the numbers of the floors between which they go; 

 Col. 5 (1-3). The lower tier is best marked " Basement Tier." Standard details for columns are 

 given in Fig. 14 and Fig. 15. 



Riveted Girders. Girders shall be marked with the number of the floors, not with letters, 



