AND EQUIPMENT 37 



be conveniently installed in the second story directly over the fill- 

 ing room. 



Where natural gas and gas from municipal corporations is 

 not available, one or more gasoline gas generators should be in- 

 stalled. These gas generators contain inflammable, material and 

 should, therefore, be located at a reasonable distance from the main 

 building. 



List of Equipment. The following is a list of the principal 

 machinery and equipment needed in an up-to-date condensery with 

 a capacity of fifty thousand pounds of milk daily : 



BOILER BOOM 



Boilers with a total capacity of 400 H. P. 

 1 boiler feed tank. 

 1 boiler feed pump. 

 1 boiler water heater. 



ENGINE ROOM' 



1 40 H. P. engine. 



2 well pumps, 150 gallons per minute each. 



1 80 light dynamo. 



Pipe and thread-cutting tools, anvil and forge. 



RECEIVING BOOM 



2 1000-pound weigh cans, "low down" style. 

 2 6-beam milk scales. 



1 can-washing machine with steam and water jets and 



air blower for drying the cans. 

 1 milk sample bottle rack. 



WELL BOOM 



6 5000-pound capacity jacketed kettles with revolving 



agitators and superheating device. 

 1 6-foot vacuum pan. 



1 7-foot vacuum pan. 



2 vacuum pumps. 



2 500-gallon standardizing vats. 

 1 6-cylinder homogenizer. 



1 internal tube cooler, capacity 5000 to 8000 pounds per 

 hour, for cooling evaporated milk. 



1 In case municipally generated electricity is available, there is no need of a 

 Dynamo and much of the equipment may be supplied with direct drive by motors. 

 This would obviate the installation of a steam engine. 



