The amount of material for steps will depend upon 

 the height of the underpinning used, which in turn will de- 

 pend upon the slope of the site. The builder should keep 

 this in mind and if more or less material is needed than 

 included in the materialslists, due allowance should be 

 made. Sufficient material for steps is included for under- 

 pinning of the height shown in the plan. 



Always place step risers on footings of stones. 

 Miter step risers to stringers. Nail steps securely to 

 both risers and stringer. 



LOUVRE BHACKSTS AND BARGE BOARDS. 



At elevations where snowfall is light louvres 

 located in each gable end may be installed. Do not instr : .1 

 louvres in regions where snowfall is heavy. Brackets ana 

 barge bocrds should be installed as delineated in drawings. 

 Note that material lists provide more brackets for roof de- 

 signed to carry heavy snow 19ad than for roofs that will n<~' . 



INSIDE FINISH. 



Any accessible kind of inside finish may be used, 

 preferably shiplap or beaded or plain ceiling. When order- 

 ing from California mills specify "C n Grade; when ordering 

 from Oregon mills or yard specify No 3 Clear. When milled 

 lumber is not available, dressed or rough lumber with 

 3/8" x 2" or 1/2" x 2" strips, over cracks, may be used. A 

 1" x 6" base should be extended around each wall. 



MOULDING. 



Plr.ce moulding in all corners. 



1st choice - 7/8" x 7/8" quarter round 



2nd - 3-corner moulding 



3rd " - dressed or rough strips l"xl" 



4th " - 1/2" x 2" battens 



-21- 



