No. 30 galvanized iron strips. Where rough board siding 

 is used set the frame casings directly over the siding. 

 Cover holes by notching 1" x 2^" strips along side of cas- 

 ings. 



CUPBOARDS AND CLOSETS. 



Build cupboards according to Details shown in the 

 plan and place them as shown in the floor plans. 



Where an office cabinet is desired build in ac- 

 cordance with plan shown in Detail 6-C. 



Provide closets witfi two 1" x IE" shelves and a 

 1" x 4" strip for wardrobe hacks. Place hooks on 18" 

 centers. 



PAINTING. 



Color"- Body fe Standard gray, 2 coats 

 Roof - n green, 2 " 

 Trim - white, 2 " 

 Inside - Any color satisfactory 



to the occupant, 2 coats 

 Floor, - Any color, 3 coats 



If the lumber is dry, give the outside and roof 

 a priming coat as soon as the siding is plrced. Put on the 

 second coat as soon as the first is thoroughly dry. Do 

 not apply paint if lumber is not thoroughly seasoned or if 

 the surface is damp from rains, fogs, frost, etc. Before 

 applying paint to knots, cover them tightly with a coat of 

 shellac. Do not paint during damp weather. Before apply- 

 ing the paint to interior, the surface should be carefully 

 cleaned. All nail holes should be filled with putty and 

 colored to match finish. To have a real fine finish sand 

 the surface. (See Paint Section of the Circular). 



paint, 



The floor should receive three cocts of floor 



PLUMBING-. 



Install thfi_, plumb ing pipes before laying the floor. 

 Study the Plumbing Section of the Improvement Manual before 

 ordering and installing plumbing fixtures. 



