INSIDE FINISH. 



Any accessible kind of insido finish may 

 "be used, preferably shiplap or beaded or plain 

 ceiling. V.'hen ordering from California mills 

 specify "C" grade; when ordering from Oregon mills 

 or yard specify "Ho. '3 Clear". When milled lum- 

 ber is not available, dressed 'or rough lumber with 

 3/8" x 2" or 1/2" x 2" strips, pver cracks, may be 

 used. A 1"::6" base should be extended around each 

 wall, 



MOULDING. 



Place moulding in all corners. 



1st. choice - 7/8"x7/8" quarter round 

 2nd. - 3-corner moulding. 

 3rd. " - dressed or rough strips 



4th. - l/2"x2" battens. 

 PLUES. 



See retails No. 6 -A aid 6-B; In regions 

 where snpwfall is deeper than 2% feet, if the flue 

 is installed 3 feet or more from the apex of the 

 roof, place the protector shown in Detail 6-B back 

 of the flue. In placing joints of pipe below the 

 roof line see to it that they are so spaced that 

 the joints passing through the roof will be set as 

 shown in the drawing. In some oases, to accomplish 

 the proper position of the joint which passes through 

 the roof, one of the lower joints will have to be 

 cut. Excepting where the bottom joint rests upon 

 its support, the terra cottc, should not be closer 

 than l-a jl to wood work. Guy the top of the flue 

 securely with throe guys of No. 9 or Ho. 12 telephone 

 wire. Place all flues before shingling the roof. 



DOORS. 



Order doors of the dimensions given on the 

 plan end fit them with locks and hinges as given in 

 the estimate. 



-25- 



