DOORS AND T/IMDOWS. 



Order doors and windows, and hardware for 

 them, according to the specifications given in the 

 material lists. Equip at least one outside door 

 with Forest Service rim locks. Equip both upper 

 and lower window sashes with two spring bolts. To 

 accomodate the bolts provide 1/4" holes at desired 

 height in the window jambs. 



ETIHDOW AND POOR 



Buy factory made frames if practicable. 

 If impracticable order the necessary material and 

 make them on the job in accordance with the plans 

 illustrated on Detail 6-D Care should be exetcised 

 in placing the studding at all openings in order 

 that the frames may bo plumbed properly. Allow at 

 least 1/8" play on each side, also on the top and 

 on the bottom. Exercise care in setting the frames 

 and see to it that they are set plumb and that they 

 are properly centered. Plash over the windows with 

 4" No. 30 galvanized iron strips. Where rough board 

 siding is used set the frame casings directly over 

 the siding. Cover holes by notching I"x2-| n strips 

 alongside of casings. 



CUPBOARDS AND CLOSETS. 



Build cupboards according to Details shown 

 in the plan and place them as shown in the floor 

 plans . 



Where an office cabinet is desired, build 

 in accordance with plan shown in Detail 6-C. 



Provide closets with two I"xl2" shelves 

 and a 1" x 4" strip for wardarobe hooks. Place hooks 

 on 18" centers. 







In Plan 1-F, the closet shown at the rear 

 of the building on the left hand side of the large 



-26- 



