The ridge of the roof should be finished with 

 1" x 6" excepting in cases where galvanized iron roofing 

 is used. With it, use galvanized ridge capping. 



SIDING. 



Use 1" x IE" boards and 1" x 3" battens, free 

 from loose knots and all knots of a greater diameter than 

 l inches. Boards should also be free from weather check, 

 rot, disfigurements and large pitch pockets. 



Finish the corners with 1" x 4 n boards* 



F100R. 



Floor for hay room only is provided. Bo floor 

 in stall section. 



STALLS. PARTITIONS^ ETC. 



Place all stalls, feed boxes, partitions, eto. as 

 shown on the drawing* 



Partitions between hay room and stall section 

 shall extend only to top of manger, or if racks are used a 

 point about half way to the top of the racks. 



Racks for holding hay may be used if desired. 

 Where loose hay is to be fed, racks are especially advanta- 

 geous. 







If a grain box is needed follow the plan shown 

 in Detail No. 6E. 



DOOR AND WINDOW FRAMES. 



Make the window frames as shown in the detail 

 drawing of them. 



-11- 



