JPhe ridge of the roof should be finished with 

 1" x 6", excepting in cases where galvanized 

 iron roofing is used. With it, use galvanized ridge 

 capping. 



SIDING. 



Use 1" x 12" boards and 1" x 3" battens, free 

 from loose knots and all knots of a greater diameter 

 than !!". Boards should also be free from v/eather check, 

 rot, disfigurements and large pitch pockets. Finish 

 the corners with 1" x 4" boards. 



FLOORS . 



No floor is provided for stall section. 



Flooring of the second story shall be of 1" x 1" boards, 

 free from loose knots with 1" x 3" battens under cracks. 

 Strips 1" thick and 2" wide shall be placed on the 

 floor joists between the battens. 



STALLS. PARTITIONS. STC . 



Place all stalls, feed boxes, partitions, etc., 

 as shown in the drawing. 



Racks for holding hay may be used if desired. 

 Where loose hay is to be fed, racks are especially 

 advantageous. 



If a grain box is needed, follow the plan 

 shown in Detail No. 6-B. Place it on second floor and 

 provide feed chutes to feed boxes. 



DOOR AMD WINDOW 



Make the window frames as shown in the detail 

 drawing of them. 



-10- 



