SIDING. 



Use 1" x IE" boards and 1" x 3" battens, free 

 from loose knots and all knots of a greater diameter than 

 lV inch. Boards should also be free from weather check, 

 rot, disfigurements and large pitch pockets. 



Finish the corners with 1" x 4" boatds. 



FLOOR. 



No floor is provided for stall section. Floor- 

 ing of the second story shall be of 1" x 12" board fee 

 from loose knots with 1" x 3" battens under cracks. Strips 

 1 inch thick and 2 inches wide shall be placed on the floor 

 joists between the battens. 



STALLS. PARTITIONS. BTC. 



Place all stalls, feed boxes, partitions, etc., 

 as shown on the drawing. 



Racks for holding hay may be used if desired. 

 Where loose hay is to be fed, racks are especially advanta- 

 ge&us. 



If a grain box is needed follow the plan shown in 

 Detail No. 6-E. Place it on second floor and provide feed 

 chutes to feed boxes. 



TOOL ROOM. 



A tool room a:; shown on the plan may or may not 

 be provided. If baled hay is used the entire soaoe unstairs 

 may not be required for hay storage. In such cases the sur- 

 plus space might be utilized to good advantage for a store 

 or tool room. 



STAIRS AKD PLATFORM. 



If a tool or store room is desired use the stairs 

 as shown. If a tool or store room is not wanted, the 

 stairs may be omitted if the buiM er wishes. If omitted 



-11- 



