GOOLBR. 



As the plan indicates the frame of the cooler is 

 of 2" x 6" with rough board and batten exterior boarding nnd 

 1" x 8" shiplap interior finish. If shiplap is not avail- 

 able, substitute rough lumber as listed in the Material List. 

 Finish all corners of cooler with 1" x 3" battens. Sawdust 

 should be tamped between the walls, floor and ceiling. Pro- 

 vide vents as intended by the plan. 



Shelves and bins may be built in the cooler to 

 suit the builder. Material for this purpose has been in- 

 cluded in the estimate. 



DOOR AND WINDOW 



Make door and window frames as shown on the plan. 



DOORS AND iVlNDOWS. 



As shown on the plan the door for the cooler is to 

 be made with double walls on 1" x 6" frame. Care should be 

 taken to hang the door "high" since it will settle some after 

 hanging. The door between the woodshed and the open porch 

 may or may not be put in. The builder may choose. If 

 used order the door as specified. Order windows as specified. 



PAINTING. 



Color - Body - Standard gray, 2 coats 

 Roof - green, Z 

 Trim - " white, 2 " 



If the structural material is dry apply the first 

 coat as soon as the siding and roof are placed. If the 

 lumber and roofing are not dry, apply paint as soon as the 

 condition of the lumber will permit. Put on the second 

 coat as soon as the first coat is dry. Do not paint if 

 lumber is not thoroughly dry or if the surface id damp from 

 ravins, fog, frost, etc. Do not paint during damp weather. 

 See the Paint Section of the Circular. 



-14- 



