CUPBOARDS AND BED. 



Build cupboards according to the detail on 

 Sheet 5 and place them as shown on the floor plan. The 

 bedstead is a box hinged to the floor. When not in use 

 it swings up and fastens to the wall. When in use, it 

 swings down to the floor. 



Use the same kind of material in making the box 

 aa is used for the inside walls. The slats shown in the 

 diagram are supplied to hold the bedding in place when 

 the box is not on the floor. Bed springe will be furnish- 

 ed upon requisition from the District Equipment Depot. 

 Requisitions should show size of springs and the purpose 

 for which they will be used, 



FLUES. 



See details No. 6-A and 6-B. Use plan 6-A in 

 regions of light or no snowfall. Use plan 6-B where snow- 

 fall exceeds 30 inches. See to it that the joints are 

 spaced and placed so that the joint passing through the 

 roof will be in the position shown by the drawings. Guy 

 the top of the floors to the buildings with three guys 

 of No. 9 wire. 



MOULDING. 



Place moulding in all corners. 



1st choice - 7/8" x 7/8" quarter round 



2nd 3-quarter moulding 



3rd - dressed or rough strips 1" x 1". 



DOORS. 



Order doors of the dimensions given in the plan, 

 and fit them with locks and hinges as given in the 

 estimate . 



WINDOW AMD DOOR FRAMES . 



M&ke the door and window frames as shown on the 

 Detail Sheet No. 4. Two windows on opposite sides of 

 building are to slide up in pocket (see detail). To 

 support the upper plate, frame and case the openings in 

 rear and on both sides before placing the roof frame. 



-12- 



