order that the frames may be plumoed properly. Allow 

 at least 1/2" play on each side, also on the top and 

 on the "bottom. Exercise care in setting the frames 

 and see to it that they are set, plumb and that they 

 are properly centered. Plash ever the windows with 

 4" No. 30 galvanized iron strips. Where rough board 

 siding is used set the frame casings directly over 

 the siding. Cover holes by notching l"::2i jl strips 

 along side of casings. 



CUPBOARDS AMP CLOSETS.. 



Build cupboards according to details 

 shown in the plan and place them as shov/n in the 

 floor plans. 



Where an office cabinet is desired, build 

 in accordance with plan shown in Detail 6-C. 



Provide closets with two I"xl2" shelves 

 and a r'xA" strip for wardrobe hooks. Place hooks 

 on 18" centers. 



PAIHTIHG. 



Color - Body -Standard gray (2 coats) 

 Eooi - Roof - " green " 

 - Trim - " white " 



Inside - any color satisfactory 



to the occupant (E coats) 



Floor - any color (3 coats) 



If the lumber is dry, give the outside end 

 roof a priming coat as soon c.s the siding is placed; 

 put on the "second coat as soon as the first is thor- 

 oughly dry. Do not apply paint if lumber is not 

 thoroughly seasoned 'or if the surface is damp from 

 rains; fogs, frosts, etc* Before applying paint 'to 

 knots, cover them tightly with a 'coat of shellao. 

 Do not paint during damp weather. Before applying 

 the paint to interior, the surface should be care- 

 fully cleaned. All nail holes 'should be filled with 

 putty, colored to match finish. To have a real fine 

 finish sand the surface. (See paint section of tha 

 circular) 



The floor should receive three coats of 

 floor paint. 



-20- 



