FLOORING & CEILIKS. 



1" x 12" material with -g-"x 3 battens to close the 

 cracks shall be used for flooring unless matched flooring 

 is readily available. The wall and ceiling shsll be cover- 

 ed with I"xl2 n material with -g-"x3" bet tens -ojzer cracks. The 

 corner shall be finished with i"x3 n battens and Ii"x2i" bat- 

 tens. A base board of I"x6" shall be extended around the 

 room. 



DOOR & WINDOWS & FRAMES. 



Door and windows shall be ordered as listed. Frames 

 shall be ordered from the mill if practicable. If not prac- 

 ticable to purchase mill made frames the material listed for 

 home made frames shall be ordered nnd the frames shall be 

 made on the job in accordance with detail of window and door 

 frames of this circular - Cut Wo. 6-D. Shutters of I"xl2 n 

 lumber on a I"x4" frame and a protector of the same material 

 Shall be made for covers for the windows and back door. They 

 shall be attached at the close of each field. season with lOd. 

 wire nails partly driven in. 



CUPBOARD AMD CLOSETS. 



The plan indicates the location of the closet and cup- 

 board. The cupboard shall be built with two sections. The 

 base section with one shelf shall be 4 feet in height. The 

 door shall be hung with a 2 inch strip between it and the 

 floor and a strip of similar dimension between its top end 

 the top of the base. The upper section shall be extended 

 to the ceiling. The door at the base shall swing flush with 

 the base and at the top a strip approximately 3 inches wide 

 shall be placed or of a width sufficient to make a snug fit 

 a;t the top of the door. The division between the base end 

 top sections shall project out 6 inches. This will serve as 

 a rest for dishes, etc. In the upper section shelves shall 

 be placed approximately 12 inches apart. The closet shall 

 be provided with common wardrobe hooks. 



PAINTS. 



Color - Outside Body - Standard gray, 2 coats 



Roof - green 2 " 



Trim - white 2 " 



-12- 



