14 



Bate Title of Drawing Name of pupil 



Place your drawing or drawings in this space so as to make 

 a symmetrical arrangement. If only one drawing is made, then 

 place it a little to the right of the middle of the page, remem- 

 bering that about an inch of the left edge of your page is lost in 

 the binding together of the sheets. 



Every part of the drawing should be named by means of a 

 series of labels. Indicate each part or structure that you wish 

 to call attention to by means of a broken line running from the 

 part to be labeled outward on the paper outside the drawing. 

 At the outer termination of this line place either a number or a 

 letter which will be repeated in the index below and which will 

 there serve to identify the part shown in the drawing. Indicate 

 exactly where the other end of the dotted line ends by a tiny 

 cross. 



The index or table of contents at the foot of the page should 

 be neatly printed ; if possible, an equal number of figures or 

 letters should be placed on each side of the vertical line which 

 divides the index into a right and left half. If the number of 

 parts labeled in the drawing is unequal, then the last or odd 

 label should be placed in the space at the bottom of the divid- 

 ing line, thus insuring a neat and symmetrical page. 



Index or Table of Contents 



