Myerson/Allen & Company 

 22 June 1988 

 Page 2 



Following the procurement of samples, the tubes were sealed and 

 packed in ice for immediate transport to Clean Harbors, Inc., 

 of Braintree, Massachusetts, a DEQE-approved analytical, 

 laboratory for analysis. Samples BSA-1 and BSA-3 were then 

 each composited from tubes for bulk sediment and chemical 

 analysis. The results of these analyses are contained in 

 Appendix B. 



Based on the levels of lead (Pb) and mercury (Hg) detected from 

 the chemical analysis, the sediment sampled at the site appears 

 to be classified as a Category 2 dredge fill material, 

 according to the criteria established by the DEQE Division of 

 Water Pollution Control. It should also be noted that 

 Polychlorinated Biphenyls (PCB's) were measured in the samples 

 at or near detectable levels. 



If you have any questions or require further information, 

 please do not hesitate to call. 



Sincerely yours, 

 HALEY & ALDRICH, INC. 



Chris M. Erikson 

 Staff Engineer 



James Wheeler 

 Senior Engineer 



CE: JW:aw/0315W 



Enclosures 



Figure 1 - Marine Sediment Sample Location Plan 

 Appendix A - Logs of Environmental Samples Taken by Guild 



Drilling Co., Inc., on 27 May 1988 

 Appendix B - Results of Bulk Sediment and Chemical Analysis 



Conducted by Clean Harbors, Inc. 



c: Fort Point Associates; Attn: Mr. James Fay 



/C9A 



