DEERE IMPLEMENT COMPANY. 



The "Deere" Gang Plow. 



In 1884 and 1885 we improved our Riding Gang Plow by adding an auxiliary lever, 

 by which the depth of the plow is more readily governed while the plow is running. 



The rear plow is provided with a screw device, by means of which the pitch of 

 this plow can be made to conform to that of the forward one. The plows are set right 

 on leaving the shop, but in taking the bottoms or the shares off for sharpening it 

 sometimes happens that they do not get exactly the same set upon being replaced. 

 This screw arrangement remedies any such difficulty. 



The Deere Gang is made with two plows, 10 or 12-inch. It is made especially for 

 heavy work, and will withstand the draft of the largest teams used in plowing. 



The vibrating tongue gives a free vertical motion, relieving horses' necks of all pres- 

 sure, and affording a draft in a direct line from the hitch at the end of the tongue. 



The main hitch is direct from the end of the beams, a feature peculiar to our plow, 

 and which gives much better results than a draft from the frame. 



There is no complication of parts on the Deere Gang, it being exceedingly simple 



in construction and very durable. 



PRICE LIST 

 [With Extra Shares.] 



Wrought Iron Frame, Iron Wheels, Hardened Iron Center, Steel Molds and Slip 

 Shares, Medium Steel Landsides, Patent Chilled Hub Boxes, Doubletrees and Breast 



Chains. Right hand only. 



Turf and Stubble Series. 



Rolling Cutters, Extra each, $5 00. 



List of Shares, Moulds, and Lands on Page 257. 

 ORDER EXTRA SHARES BY NUMBER STAMPED ON BOTTOM OF EACH. 



