SAN FRANCISCO, CAL. 



65 



Deere "Zig-Zag" Steel Lever Harrow. 



With Plain Steel Teeth. 



In the construction of this Harrow the threaded tooth with a top nut has been dis- 

 pensed with, and in its place a simple, strong clamp device is used, holding the square, 

 steel tooth firmly to place, easily released, and admitting of an adjustment for depth, 

 or for turning the tooth that different edges may be presented to the front, thus insur- 

 ing a keen cutting edge and uniform wear. 



The bars of Channel Steel are set in collars at either end, giving a short leverage 

 to the resistance of the tooth, and a consequent light strain upon the frame. 



The range of the lever is sufficient to give the teeth any angle, from a pitch for- 

 ward, backward to a horizontal position for transportation. 



The coupling, or running rods, are all upon the top of the frame, giving perfect 

 clearance underneath, with no tendency to gather trash. 



Two sections are shown in the cut ; one with the teeth perpendicular for pulveriz- 

 ing, the other with the teeth slanting for smoothing. 



A PERPENDICULAR TOOTH HARROW AND A SMOOTHING HARROW IN ONE. 



PRICE LIST. 



2 Section Channel Iron Lever Harrow, 50 teeth, 8-foot, weight, 220 Ibs $20 00 



2 

 2 

 3 

 3 

 3 

 4 

 4 



inch teeth will be sent if order calls for no special size. 



inch square teeth. 



We can supply )^ or 



