172 DEERE IMPLEMENT COMPANY. 



"Milwaukee" Improved Reversible Wood Track Hay Carrier. 



This Carrier will run on 4x4 or you can use a 3x4 or 2x4, by bolting a piece of 

 wood underneath stoplock, so that where stop is bolted it will be four inches, and will 

 work either way from the stop without change as it will pass the stop to right or 

 left as well. All that is necessary to work it either way is to draw the main rope 

 through, and hitch to the end extending to the direction you wish to draw your hay. 



The knot in the other end of the rope will hold it firmly, as it rests against the 

 carrier. The lock is composed of two parts only, and is perfect in its working. Being 

 a positive lock there is no guess work about it. It is made of the best malleable iron, 

 and neatly finished. It is much lighter and easier handled than the heavy, cast-iron 

 carrier. 



DIRECTIONS FOR PUTTING UPAND OPERATING WOOD TRACK CARRIERS. 



The track may be hard wood or pine scantling, 4x4, dressed to 3% inches in width. 

 If not convenient to get this size or the full length, 2x4 or 3x4 may be used, by nail, 

 ing a piece on where the stop is placed, so as to fit the carrier and operate the lock 

 properly. If 4x4 track is used one hanging hook to each third rafter will do; but if 

 lighter track is used every second rafter should have a hook. Always put an extra 

 hook over the load near the stop. Use %-inch manilla rope, as it is the best size, and 

 will wear better than heavier rope. 



" Milwaukee " Reversible Carrier, weight 28 Ibs, price $6 00 



