CULTIVATORS-WHEEL OR SULKY. 



cross-piece E by rods 3 and 4, in the manner and for the 

 purpose set forth. 



5. — The combination of two supporting-levers F and F' 

 with the spring-bolts and curved notched bars d and d\ 

 with the hinged inclined auxiliaiy frame H H', when con- 

 structed and'ananged to operate in the manner shown. 



6. — Tlie adjustable foot-rest M, notched standards L, and 

 holding wedge 9, when constructed and arranged to operate 

 together in the manner and for the purpose described. 



7. — Adjusting the auxiliary frame H H' with the plough 

 standards, to ditferent widths by means of tlie arched coup- 

 ling-bar K, and screw staple-clamps h, as described and 

 shown. 



8. — The screw eye-bolt P and socket-plate or block Q, 

 in combination with bed-plate R, constructed and arranged 

 to operate as shown. 



9. — The standard O, screw-eye bolt P, socket-plate or 

 block Q, and bed-plate R, in combination with beams H 

 and H', substantially as shown and described. 



10. — The saftypin /, in combination with the standards 

 O, screw eye-bolt P, rings /, brace-rod k, and auxiliaiy 

 frame H and H', in tlie manner and for the purpose de- 



1 1 . — The combination of the rigid frame, consisting of 

 the tongue D and axle C, the hinged auxiliary frame H and 

 H', carrying the ploughs, and their means of adjusting the 

 same lalLiailv, c(in--i-ting of the arched bar k and screw- 

 staples h. with the li Hit-supports M M and the lifting and 

 holdinL; ilcNice^ Mi|iiiorted upon the tongue and axle, in the 

 manner and fur the purpose shown and described. 



No. 4,581.— THEOPHILUS F. BERTRAND and 

 PETER SAME.S, Rockford, III.— O/Z/nw/wj.— 60,916, 

 January \,\%i>l. — Reissue 4,309, J/ffrc// 28, 1871. — Reis- 

 sued October 10, 1871. 



Claim. — I. — The cross-piece E, attached to tongue D and 

 bracket a, substantially in the manner and for the pnqmse 

 described and shown. 



2. — The standards c and r', having pulleys x and x' , 

 when arranged upon and attached to the axle C, in combin- 

 ation \\ ith the chains and rods 7 and 8, and the hinged in- 

 clined .III i'i II ^ fiiiiic H and H', arranged to operate sub- 

 staiui.ili-. :i i ■ li iiiil described. 



j;.- I i : ' 11 itched bars d d', secured at their upper 

 ends iii ill 1 Hi ' iiils <- and <•' by rods 5 and 6, and to the 

 cross-piece E Ijy rods 3 and 4, in the manner and for the 

 purpose set forth. 



4. — The combination of two supporting levers F and F', 

 with their spring-bolts and curved notched bars </ and rt", 

 with the hinged inclined auxiliary frame H and H', when 

 constructed and arran>^»ed to operate in the manner shown. 



5. — The adjustable foot-rest M, notched standards L, and 

 holding-wedge o, when construcled and arranged to operate 

 together in the manner and for the purpose described. 



6. — Adjusting tlie auxiliary frame H and H', with the 

 plough standards, to different widths, by means of the 

 arched coupling-bar K and screw staple clamps k^ as de- 

 scribed and shown. 



7. — The chains or rods 7 and 8, when their pendant ends 

 are connected to bearings or supports that project outside of 

 and are not affected by the adjustment of the beams H and 

 H', as described and shown. 



8. — The screw-eyebolts P, and socket-plate or block t^, 

 in combination with bed-plate R, constructed and arranged 

 to operate as shown. 



9. — The standard O, screw-eyebolt P, socket-plate or 

 block Q, and bed-plate R, in combination with beams H 

 and H', substantially as shown and described. 



10. — The safety-pin /, in combination with the standards 

 O, screw-eyebolt P, rings /, brace-rod k, and auxiliary 

 frame H and H', in the manner and for the purpose de- 

 scribed. 



II. — The combination of the rigid frame, consisting of 

 the tongue D and axle C, the hinged auxiliary frame H and 

 H' carrying the ploughs, and their means of adjusting the 

 same laterally, consisting of the arched bar K and screw- 

 staples /;, with the foot-supporters M and .M, and the lifting 

 and holding devices supported upon the tongue and axle, in 

 the manner and for the purrose show n and described. 



No. 61,040.— HENRY P.ARSALOW, Saint Anne, 

 \\.\..— Ci<ltiv„/ors—J,iituiU'v S. 1S67. 



Claim. — I. — The beams (; attached to the front of the 

 frame .\ by an adjustable universal joint connection, and 

 suspended by chains near their rear ends to travelling rol- 

 lers / on the raised cross bar /) of frame A, substantially as 

 and for the purpose set forth. 



2. — The combination of the mounted frame A, plough or 

 shear beams G G, and detachable seat E, stirrups and foot 

 piece E', all arranged substantially as and for the purpose 

 specified. 



No. 61,091.— R. B. PARKS and J. R. PARKS, Nepon- 

 SE-r, \\.\..— Cultivators.— January 8, 1867. 



Claim. — I. — The angular bars H pivoted to bar I, and 

 connected widi the treadles J by links e, in combination 

 with the beams' D, and operating substantially as described, 

 for the purpose s|>ecified. 



2. — The pivoted liars L, in combination with the ploughs 

 K, and standards E E', and set screw «■, substantially as 

 described for the |uiipnse sjiecified. 



No. 61,195.— 1< illX IIIXDMAR.SH, IIknrv, III.— 

 Corn Ploughs. — j,!i:ii,:ry 15, 1867. 



Claim. — I. — The lever X, in combination with the stand- 

 ard O*, for sustaining the plough in an elevated position 

 when required. 



2. — The rods O O, plough beams G G, cross-bar P, and 

 screw Q, combined and operating as described. 



3. — The combinition of the phmgh beams G G, .stand- 

 ards L L, lever N, and lirace rods/, all arranged and .ap- 

 plied to a mounted frame A, to operate in the manner 

 substantial! as and for the purpose specifid. 



No. 61,450.— C P. NORTON, Roseville, III— r«///- 

 vators.— January 22, 1S67. 



Claim. — I. — The pole B, arch C, and supporting wheels 

 D D, constructed and arranged substantially as and for the 

 purpose herein set forth. 



2. — The pole B /», fi!i. i, sliding box f, loop F, and set 

 screw '■, in rnnneiiimi w 't!i tin- jilmigh beam A, all ar- 

 ranL^i-il ii'l i' iii- ! ■■ iii-' tiii 'lii' i nijiose described. 



.\ii '1, 'iiiijiil W n.-HK, Bloomington, 



ILI.-' ' , i. i 1, , -7,»/«,7ri'29, 1867. 



Claim. — liie i.iiiiiiiuatioii ul ilie vibrating beams G G 

 and the braces 1 I, connecting them with the draught pole 

 E, the liUtside ]il(iu_;lis K K. connected by the sheaths 

 b h Mv\ the rods ,/,/ with the beams Ci G, and the inside 

 ploughs 1, 1, connected by the swivel cou] lings ^^?- to the 

 standards ,t .1, and the rods e e to the braces I I, arranged 

 and o]iei-ating substantially as and for the purposes herein 

 described. 



2. — Forming the shovels or shares K K E L, in such a 

 manner that if a line were drawn in its oblique section, as 

 shown in fi^. 3 of the drawings, the same would stand at 

 an angle of about 22° from the standards b b e i\ to which 

 the shovels or shares r re attached, and said ploughs having 

 such a bevel that the point of the cutting edge when 

 throwing inw;u-dlv shall be u]ion the inside of a line con- 

 tinue.! ill llii- ilii. i'liiiii ..f the length of the stan.lards b b e c, 

 and -, ■ . i ■ ■■ '■ !■ tliri.wiii,' imtHanlU -hall be upon the 

 outsi I II ! ii. liii- the |iUr|Hise of [.reventing any 



lateral y^~ - uf. -n' st.mtiallv as heiein set forth. 



No. 01.1.22.— I.\C( )B KE.'^SI.ER, York County, Pa.— 

 Cultivators. January 29, 1867. 



Claim. — The arrangement of the teeth G G, as constructed 

 with the bars E E, rods D and a, and the frame of the ma- 

 chine, as and for the purposes specified. 



No. 61,649. — A. H. AI.Ll.SON, Charlottesville, 

 Inii. — Cultivators. — January 29, 1867. 



Claim.— I.— The plough beams D I), suspended to the 

 curved guide-rods f f, and connected with the stirrups or 

 levers ;'"-, for obtaining Lateral movement in combination 

 therewith and with the vertically sliding cross-heads F F, 

 the levers H H, and the springs m m, constructed, arranged, 

 and operating substantially as and for the purpo.ses herein 

 described. 



2. — The arrangement of the rotary perforated clod guards 

 n n, combined with the ploughs b b and beams D D, con- 

 structed and operating as herein set forth. 



No. 9,085.- ASA H. AI.Ll.SON, Millville, Ind., as- 

 signor to Eagle Manufaclur'ng Company. — Cultivators. — 



