238 



CULTIVATORS-WHEEL OR SULKY. 



n- t.) facilitate the 

 .i,...l angle. 



IS( )\, Ancaster 

 riAKin, Canada. — 



Filed August ii, 



ready adjustment cif the toutli tw anv > 



No. 189,266.— JOHN klCHAI 

 Township, Wentworth Oh nm', i 

 Fallow-Cullivators.— April 3, 1877, 

 1876. 



Claim. — I. — In combination with the frame D, adjustably 

 secured to the rear of the cultivator by the rod O and pin c, 

 the rods P and nuts R, for adjusting the height of said 

 frame, and the chain Q, and wheel M, and its pawl for 

 elevating said frame, suljstantially as herein set forth. 



2. — In combination with the draft-bar (1, the center-bolt, 

 and rear adjustable liar O, the bar J, for preventing the 

 frame from drawing oMiiiujly, sul)?tantiallv a> set furth. 



3. — The combination of the draft-bar G, bolted to the 

 tongue, the link H and hook I, attached to the frame D, 

 and the bar J, secured to the rod O, as and for the pur- 

 poses set forth. 



No. 189,896.— J. M. LONG, Hamilton, Ohio.— O//- 

 tiva/ors.— April 24,, iSy-]. Filed Vl/ry 31, 1876. 



Claim. — I. — The frame consisting of rigidly-connected 

 parts A B, in combination with flexibly-connected parts C 

 E D' O and stay D, substantially as and for the purpose 

 described. 



2. — The combination of the draft-bar D' and stay D with 

 coupling O and double-tree E, as and for the purpose 

 specified. 



3. — The hinged coupling-block F, in combination with 

 pivoted axle-arm supports C, draft-bar D', .stay D, double- 

 tree E, and plough-beam H, as and for the purpose de- 

 scribed. 



4. — In combination with the upper branches of pivoted 

 axle-supports C and shaft 3, the collar/, with its set-screw 

 for laterally adjusting the ploughs and carrying-wheels, in 

 the manner and for the purpose specified. 



No. 190,247.— WM. PIERCE, .Stoneiiam, Mass.— 

 Slriui'berry and Vegetable Cultivators. — May I, 1877. 

 May 5, 1876. 



Claim. — I. — The stationary and vibrating blades and 

 cam-grooved roller, in combination with the belt to pick 



and thi 



in, the vines severed from the row, 



2. — 1) I : , ,: h I'n viliiating vine cutting blades, 



the cuUi\ ' , 1'. It, and the box or receptacle.! 



to o,nta)i ;n. ■ 11 -jintiallv ;vs described. 



No. 190,328.— \V. V. HUBBARD and J. W. ROBIN- 

 SON, Farmland, Ind. — Cultivator Attachments. — Mav 

 I, 1877. Filed January 6, 1877. 



Claim. — 1. — In combination with the extensible lever I 

 and adjustable rack bar J, the plate D and the tongue and 

 lever gears E G, substantially as described, and for the 

 purpose set forth. 



2. — In a wheel-cultivator, the supporting plate D, with 

 its extension D', made in one piece, and attached to the 

 transverse braces of the wooden frame A, in combination 

 with the pivoted tongue F, having gear E, and the pivoted 

 Icvrr T. h-viiiL: i;car G, whereby the gears are supported by 

 sa.l I 1 ! . il , ^ held in engagement with each other, and 



sill I' t-liuctions from below, substantially as de- 



si 1 •• u \ ) 1 he purpose set forth. 



N.. lo ',o7J. -1;. M. KISSELL and M. L. KISSELL, 

 Sii;i\ i,i II I h, ( ^\\M.— Wheel-Cultivators.— May 22, 1877. 

 Fll-I .\: r /v.-', II, 1876. 



Claim. — I. — The safety break joint B, pin c, slot tl, 

 gutta-percha blocks e e, or their equivalents, shields //', 

 screw bolts ^^, substantially as described and shown. 



2. — Hitch bars E, arched axle C, and brace rods D, in 

 combination with the beams and tongue of a cultivator, 

 constntcted and arranged substantially as shown and de- 

 scribed. 



No. 191,101.- NATHAN T BREWSTER and A. D. 

 NEHER, RosEVlLLE, Cal. — Cultivators.— iVay 22, 1877. 

 Filed April 11, 1877. 



Claim. — I. — The double separable frame A A', com- 

 bined with the detachable blocks B and the cultivator 

 teeth C, having reduced shanks passing through the said 

 blocks and bars, to be secured above the same, and pro- 

 vided with braces D, substantially as and for the purpose 

 set forth. 



2. — The combination, with the double frame A A', of 

 the detachable blocks B', held by the shank of the cultiva- 

 tor tooth, and the axle of the transporting wheel, arranged 

 in bearings in said blocks, as and for the purpose de- 

 scribed. 



No. 191,179.— WM. J. ROBERTSON and PHILIP 

 KNIGHT, Jasper County, Uo.— Cultivators.— May 22, 

 1877. Filed April 13, 1877. 



Claim. — I. — A plough beam g, consisting of two parallel 

 plates, the end of one being fastened to the inside of the 

 mould-board, and the other to the inside of the land side, 

 in combination with the interposed plates / and the plates 

 e, for connecting the beam to the axle, substantially as 

 shown. 



2. — The i>lough beam g, consisting of two parallel plates 

 that are separated by the interposed plates /, and which 

 have their front ends turned outward at right angles, 

 so as to receive the clevis //, substantiallv as set forth. 



No. 191,347.— JOHN JONES, .Stoney Point, Cal., 

 assignor of two-thirds his right to SIDNEY B. HOLLY 

 and WM. H. n\GOOT<i.— Cultivators.— May 29, 1877. 

 YWeA January 15, 1877. 



Claim. — The combination, with the plotigh frame \ B, 

 having its rear end mounted upon the axle D, of the beam- 

 extenson F, provided with the rack /, spindle g, driving 

 wheel H, and upward turned standard 1, and secured to 

 the front of the frame, and lever ()/ pivoted to standard I 

 and spindle <,', and conncclin;.,' rod j, which passes back 

 over the frame and under the driver'^ seat, and rod K 

 secured to the rear axle, the several parts constructed and 

 arranged to operate together in the manner herein shown 

 and described. 



No. 191,606.— AU.STIN S. McDERMOTT, Praikie 

 Creek, (.VIeli.eray P. ().,) Iowa. — Cultivators. — June 

 5,1877. Filed/,,,;,,,,;;,. 20, 1877. 



(.'laiiii.- The combination of the sockets C, the cranks 

 D', the chains K-, the levers G', ihe pivoted standards H', 

 the keeiicr- and cttcbes V J', and the pins and .springs K' 

 L', with the plough beams J and the axle B, substantially 

 as herein shown and described. 



No 191,660.— WILLIE E. DEWEY, Elkhorn, Wis. 

 — Cultivators.— Jiiiir ;, 1.S77. Filed .April XT., 1877. 



Claim.— I.— The , oml.inath.n ..f the tongue or pole D, 

 the angular or bent . ,1-11114. .1 arm^ H, having transverse 

 slots X, the drag bu, I. |iivotin^' bolts /,, and adjusting 

 bolts d, all substantially as and for the purposes herein set 

 forth. 



2. — The combination of the tongue or pole D, angular 

 slotted anns H, pivoted adjustable drag bars I, and the 

 split or crolched tongue E, secured to the axle A, and 

 attached above the tongue U to the same by the link a, all 

 substantially as and for the purposes herein set forth. 



3. — In combin,ation with the tongue or pole D, carrying 

 the drag bars, the hinged lever O, carrying the adjustable 

 seat N, the standard P, with hook t, and the connecting 

 chain v, all substantially as anil for the purposes herein set 

 forth. 



No 192,462.— TAMES SHERRILL, Harrisburg, 

 OK-^CO^.-Cultivn'tors.-June 26, 1877. Filed March 3, 

 1877. 



Claim. — I. — The plough standard M, pivoted between 

 and at the ends of elastic bifurcations of beam E, and 

 having a wedge-shaped projecting end beyond the pivot, 

 the bifurcations converging from the top downward to hold 

 the standard end, as shown and described. 



2. — The plough beams E, having their forward ends bent 

 sidewise into U fonn, to receive the cross rod F of the 

 draw frame G H I, substantially as herein shown and de- 

 scribed. 



3, — The draw frame formed of the cross rod F, the 

 curved bar G, the cross bar H, and the parallel bars I, in 

 combination with the plough beams E, the clevis J, and the 

 adjustable supporting bars L, substantially as herein shown 

 and desribed. 



No. 192,541.— GARRY .STORM, Portland, Mich., 

 assignor to "himself and JACOB M. BENEDICT, same 

 place. — Cultivators. ^Juile 26, 1877. Filed January 22, 

 I87.';- 



Claim. — The combination, with the axle beam C and 



