PLOUG?-IS-WHEEL OR SUKLY. 



. Il-vci- C, winillass Is 

 liee H, respcclivcly, 

 »' as scl forth. 

 IKS, QUINCY, Ii.i.. — 



2. — The combiii.ui -11 .1 i!ii 

 tongue I, and ciu 

 amstiucteil and an 1 _ 



No. 7^.607.— DA \ 111 W . 

 /■/„„. /,,._y„„„,„.,. 21, 1S6S. 



Cliiin.— I. — The placing of the ploughs at the outer 

 ^i.U^ of the wheels B 15, substantially in ihe manner as and 

 for the purpose set forth. 



2. — Having the ploughs or shares I J placed in reverse 

 oblique positions for the purpose of dispensing with a 

 landside, to avoid friction and draught, and to keep 

 the implement in line with the line of draught, as set 

 forth. 



No. 73,707.— A. FARROW, Caruoi.i.town, Ii.i,.— 

 Gan^'-P/oiig/is.—yaiiitaiy 28, 1868. 



Claim. — I. — The combination and arrangement of the 

 lever C, link <-, and traction connections /' i', herein shown 

 and described. 



2. — The lever C, arm C, sector C, rack C, and plough 

 beam H, when combined and operated substantially in the 

 manner and 'or the purpose herein shown and de- 

 scribed. 



No. 74,23s.— W. W. MATHEWS, Yates Ccty, III.- 

 Gang- Ploughs. — February 11, 1S6S. 



Claim. — I. — The braces ff a, draught bars * /<, standards 

 r <•, con.structed and in combination sub.stantially as shown, 

 for the uses and purposes herein set forth. 



2. — The method of raising, lowering, and securing the 

 front end of plough beam by means of the levers c and K, 

 pin r, clevises h h, draught bar /, cog wheels m and n 11, 

 with their friction roller, flanges, the lock c, crank lever/, 

 and treadle q, or by any means substantially the same, all in 

 combination and as shown, for the uses and purposes herein 

 set forth. 



No. 74,268.— A. Q. ALLTS, Dayton, Ohio.SiMy- 

 Phughs. — Fel>rua}y II, 1868. 



Claim. — I. — The serrated link B, or its equivalent, for 

 the purposes and substantially as herein described. 



2. — The lever and bar D, or its equivalent, used for the 

 purpose substantially as herein sot forth. 



:;. — The Lomliinatiiiii and arrangement of the guide bars 

 I' ihl '1:. r .;i. !i iii'l li \i.i (',, for the purpose and substan- 



; III !i.: i. : !i 1 the several parts, for the purpose 

 an. I -',i!.-i )nii,ilK ,1 \^.^. .n ^et forth. 



.\n. 74,554.— Kl. IAS LEVEE, West Point, Iowa.— 

 Sulky- Ploughs.— February 18, 1 868. 



Claim. — I. — The combination of the sliding guard or 

 guide bars J and K with the i.lnu.^rli In am A and with the 

 tongue F or frame of the -nil',, nl-i nijally as herein 

 shown and described, and f. n i ■ 'i 1 forth. 



2. — The coml>ina;ion of tlr^ ,1 |.i.,,,,l, ;,,,, R, adjustable 

 bent lever S, and bar or liaudlc U uuli each other, and I 

 witli the plough beam A and support T. attached to the 

 tongue F or frame of the sulky, substantially as and for the 

 purpose set forth. 



3. — The combination of the crank journal g^, slotted 

 support g^, wheel I, and axle, substantially as described 

 and for the purpose specified. 



No. 75,069.— GEORGE STEINEGGER, Highland, 

 III.— 6-<;;.-;-/'/,v/-/;j.— jy,,;-,-// ;;, 1S6S. 



Claim.— 11k. v«iii-in- licams B B', when lifted by the 

 lever li and link v, ~uli-.t.iiuially as shown and described, in 

 combination w ilh the lateral braces /, eye plates /, and bolts 

 k, or their equivalent, all as and for the purpose set 

 forth. 



No. 75,268,— CHARLES HESS, Lyons City, Iowa.— 

 Gang- Ploughs.— March ID, 1868. 



Claim. — I. — The slot T in the head piece, and axle to 

 adjust the tongue. 



2. — The iron beams, when used in a gang-plough. 



3. — The combination and arrangement of the parts, 

 when constructed and use.l a-, above set forth. 



No. 75. !;67— WILLIAM NELSON, Cacherville, 

 Cal., .assignor to himself, C. E. MOORE, and A. J. 

 VK\'-r^^\K.— Gang-Ploughs.— .Varcli 17, 1868. 



Claim. — I, — The attaching of the plough beam N N to 

 the axle A by means of the boxes L L, constructed sub- 

 stantially as shown, in combination with the frame C, to 



which the draught jiole D is attached, said frame being 

 connected to the axle A, as shown, and all arranged to 

 operate in the manner substantially as and for the purpose 

 set forth. 



2. — The notched segment bar G, in combination with 

 the lever H and arm J, connected by the chain I, and 

 attached respectively to the draught pole D and the axle A, 

 and all arranged to operate in ihe manner substantially as 

 and for the purpose specified. 



3. — The yokes or frames O, provided with the screws/, 

 and attached to the lower plates b of the boxes L L, with 

 the plough beams N passing through them, substantially as 

 and for the purpose set forth. 



No. 75,832.— C. N. BAKEWELL, Normal, III.— 

 Sulky-Ploughs and Harrows— March 24, 1868. 



Claim. — I. — Broadly attaching the same draught to both 

 the plough beams and carriage, by divided tugs, in such 

 manner that each draught is independent of the other, as 

 herein specified. 



2. — The combin.ation of the frame A, supported upon 

 wheels B, driver's seat E, and lever F and chains G and li, 

 for suspending adjustably a plough or harrow', substantially 

 in the manner set forth. 



3. — The combination of the chains G and H, for suspend- 

 ing the plough or harrow, and lateral chains H', attached 

 to the franie, substantially as and for the purpose set 

 forth. 



No. 75,871.- GEORGE J. DAHL, Stockton, Cal.— 

 Gang-Ploughs. — March 24, 1868. 



Claim. — I. — A plough standard, constructed substantially 

 as shown and described. 



2.— The orifices n n of the offset m, as and f..r the pur- 

 pose set forth. 



3.— The tenon hooks «' n' of the adjustable landside 

 in', as and for the purpose set forth. 



4.— The head piece /; of the standard D, constructed as 

 described, and made with the central opening /, as and for 

 the purpose set forth. 



5. The adjiisl.ihlc landside m' , in combination with the 



standard L), arrant;eil in the manner described. 



6.— The scraper ,-, in comliination with the caster wheel 

 d. as and for the purpose set forth. 



7. — A series of ploughs, constructed and operating 

 as set forth, in connection with a frame of the kind de- 



No. 75,89:;.— WILLIAM -S. GATLIN and BENJA- 

 MIN R. IIL'BBARD, Green Top, Uo.— Gang Ploughs. 

 —March 24, l858. 



Claim — I. — The construction and arrangement of the 

 draw bars h, the links C, the levers C, and the racks C2, 

 with reference to the frame A' and the plough beams B. 



2.— The device, D, D^, D'^ D', and </, for lifting the 

 ploughs up out of the ground, substantially as described and 

 set forth. 



No. 75,901.— W. E. HARDIN, Bowling Green, Mo. 



p/nrr'lS -Mi-ch 2\, lS58. 



Claim.— I.— The lifter D «" D' D', when constructed 

 and operated a- drscvibed and set forth. 



2— The aJjustabie axle A' a, when constructed and 

 employed in the manner shown and described. 



No. 75,925.- JOHN L. KEASOR, Laconia, N. H.— 

 Gang- Ploughs.— March 24, 1868. 



Claim.— I.— The combination of the vertical standards 

 M, eye bolts or keeiK-is n' . vcrta-al bars N, hortzontal bars 

 O, and keepers R s -miK ■ -< li ilur, with the ploughs G or 

 II, and with the Ion- 1 : : n ! • I', substantially as he - 



airpose : 



: forth. 



shown and descriln i. n ; 



2.— In combination unli ilic .liafl U, arranged as shown 

 and described, the cams V, chains T, and horizontal bars F, 

 all constructed and operating as described, whereby the 

 ploughs G H are raised and lowered. 



■3.— The construction, combination, and arrangement of 

 the adjustable lever W with the shaft U, for the purpose of 

 operating said shaft, substantially as herein shown and de- 

 scribed. 



4.— The combination of the draught chains I with the 

 bolster E and forward ends of the plough beams g' or h' , 

 substautially as herein shown and described. 



5.— The combination of the chains J with the forward 



