PLOaOHS-WHEEL OR SULKY. 



381 



2.— The combination of the vertical adjustable frame C, 

 kceiKiN // /;. U|)iii;ht I, with plough-beam attached thereto, 

 anil ihi' lever 1 ), as ami for the purposes herein set forth. 



2j.;..s>Si.-iSAACl!URKE, Sacramento, Cal.— i-««7- 

 /:■,'«,'//..—/..'/;.■(,/';)■ 27, 18S0. Filed /,7H«nrv 31, 1879. 



(_ l.iiin— 1. — The combination of the axle C, constructed as 

 iic>ciilic(l, the guide-standard K, guage-standard G, and 

 frame .M, suh.->ta)itially as and for the purposes set forth. 



2. — The axle-tree or bar C, having the sockets C and the 

 boxes F formed with or upon it, to receive the standards G 

 and K, so that the ploughs are guided and the pressure is 

 applied to them directly through the lino of the axle, sub- 

 stantially as and for the ]uii|i(.,c l]erein de^eribed. 



No. 223,833.— GKitRCK AKMSFRi iNT,, Elmira, and 

 DU.VCAN L. MURi'l I i;si i\, W K A 1 11 iksi. iKLL), III.; said 

 MURCHESON assii^noi t.. ^aid ARMS rkoXG.— C««jr- 

 Phughs— January 27, 18S0. Filed Fehruary 8, 1878. 



Claim. — In a gang-plough, the pulley C D,in combination 

 with the bar B, lever F, and rod H, substantially as and for 

 the purpose specified. 



No. 224 934.— jO.SEPH B. NEFF, Cuba, assignor to 

 REUBEN ELWOOD, .Sycamore, \\.\..—S,ilky-Plougks. 

 —Feiji-mny 3, l8Sj. Filed December 16, 1S7S. 



Claim. — I. — The combination of the brackets c, attached 

 to the pljugh-beam with the rods a and adjustable collars d, 

 for allowing the bracket-; a limited free play on the rods, 

 substantially as described. 



2. — The combination of the brackets r, rods a, and ad- 

 justable collars (/ with the collar iJand rock-shaft C, substan- 

 tially as set forth. 



3. — The plate k, having the ears /, in combination with 

 the beam D and bar or rod O, substantially as described. 



4 — The extended bar k, for supporting an evener inde- 

 pen lently of its clevis-support, con-tructed and applied sub- 

 stantially a-i specified. 



5. — The cjmbinalion of the bent axle or frame A, arms 

 X, rod O, adjusting-bar P, and bar F with the cranked or 

 bent rock-shaft C. lever, J, one or more rods, a, one or more 

 brackets, c, and plough-beam D, all constructed and operat- 

 ing substantially as speci.ied. 



No. 224033.— lOSEPH B. NEFF, CuiSA, assignor to 

 RKUIJEN KI.WoOD, Sycamore, \\A..Sulky- Ploughs. 

 — / ■ .7 ■- ; ;,, iSS .. Filed December 16, 1878. 



I ! : i. ul'iiiati.in with the pivoted tongue F, the 



al:.: ' t I stirrup e, and slotted bracket a, the 



pi\<i|.!l i'-li .', - n.ued plate*, and bolt c, substantially as 

 shown and .le-eribed. 



No. 224,095.— BENJAMIN F. LITZENBERG, Rus- 

 sell, \o\s \.—Su!ky-PLitghi.—Febntary 3, iSSj. Filed 

 December 12. 1870.' 



Claim.— Ill !. 

 sitting of t!i 

 having lev.. M, 



-eiibed improved sulky-frame, con- 

 ilesAA, axle D, crank-axle F, 

 -1 bail L, and spindles H H, all 



lid operating substantially as and 



constn 



for the purpose set forth. 



No. 224 188.— WILLIAM A. JAMES, St. Louis, Mo. 

 — Salky-Ploif^hs. — February 3, 1S80. F'iled December 4, 

 1879. 



Claim. — In a sulky-plough, the combination, with the 

 crank C of the axle Band the beam D of a plough, of the 

 bent bar G, provided with stops H, the angle-irons I, adjust- 

 ing-bolts, and the adjusting-braces L, substantially as herein 

 shown and described, so that the plough may have the ad- 

 justments asset forth. 



No. 9 5)1.— WILLIAM A. JAMES, St. Louis, Mo.— 

 Sulky-Ploughs.— 22ii„\'i'&, February 3. l88j.— Reissued 

 De.ember I 1880. Filed Xov:,:ib:r r, l88j. 



Claim. — I. —In a suHiV-plough, the combination, with the 

 crank C of the axle-arms B B' and the be.am D of a plough, 

 of the bent b.ar G, provided with stops H, the angle-irons I, 

 adju-ling-bolts, and the adjusting-braces L,. substantially as 

 h jrein shown and described, so that the plough may have the 

 adju tments as set forth. 



2. — The combination of axle B B' C, arched seat-support 

 P, and arm R, attached to the part B of the axle and hinged 

 to t'le support P, sub-tantially as and for the purpose set 

 forth. 



3. — The combin.ation, in a sulky-plough, of lever Y, 

 nt.iched segment r, crank-axle B B^ C, arched seat-support 



P, and arm R, constructed and relatively arranged substan- 

 tially as set forth. 



4. — The combination of axle-crank C, bridge-bar G, and 

 angle-irons I, adjusting bolts and nuts J K N, bars L, and 

 plough-beam with eye-lugs M, for the purpose set forth. 

 1 5. — The combination of bridge-bar G, with slotted ends to 

 embrace the axle, and blocks O, constructed to fit the slotted 

 ends and bear against the under side of the axle, for the par- 

 pose set forth. 



6. — The combination of axle-crank C, bridge-bar G, stops 

 H, and angle-irons I, substantially as and for the purpose set 

 forth. 



No. 224,195.— AU(;UST LINDGREN, Moline, III.— 

 Sulky-Ploughs.— February 3, 1880. Filed y«K6' 28, 1879. 



Claim. — I. — In a sulky-plough, the combination, with a 

 hand-lever O, having toothed segment at lower end, of 

 the bar E, pivoted near its forward end to the bar F, pro- 

 vided with the furrow-wheel axle H, and having the 

 toothed segment M, the axis of the furrow-wheel being 

 distinct from that of the segment and in the rear thereof, 

 as shown and described, whereby the furrow-wheel and 

 segment are lifted together. 



2. — The combination of the connecting-bar V, the crank 

 W, and the sleeve X with the bent bar E, the block G of 

 bar F, the catch-plate C, the lever Y, and the slide L, 

 that carries the axle of the land-side wheel, as shown and 

 described. 



No. 224,455.— ELBRIDGE G. MATTHEWS, La 

 Sank, Vi.\^^.— Ploughs.— February 10, iSSo. Filed March 

 I. 1S79. 



Claim. — I. — In a plough, the combination of the crank- 

 axle C, having the perforated disk D, with the sliding- 

 arm M, sub.,tanlially as and for the purposes set forth. 



2. — In a plough, the crank-axle C, having the perlorated 

 disk D, with the sliding arm, in combination with the 

 ploughs L L', secured to the racks F, working in ways 

 in the block E, and the pinions G G upon the shaft J, 

 carrying the perforated disks H I, and the hooked rods K, 

 substantially as and for the purposes set forth. 



No. 224,713.— JAKOB F. MUiNZ, Del.wvare, Ohio. 

 — Sulky- Ploughs. — February 17, l88o. Filed December 3, 

 1879. 



Claim. — I. — The combination, with the arch a' and the 

 brace or frame a*, having the series of holes i in its lower 

 end, of the swing-brace /;', having its upper end pivoted 

 near the u|)per end of the inner side of the vertical arm a", 

 the head-block h, journaled in the lower end of the brace h' 

 and in one of holes 2 of frame a', and yoke or bail d, sub- 

 stantially as set forth. 



2. — In a sulky for ploughs and cultivators, the combina ' 

 tion of the side bars, a, the arch d\ the braces or frames a*, 

 having their ends secured to the bars 3 a in front and rear of 

 the vertical arm iz' of the arch a', and having their lower or 

 bow ends secured to the lower ends of the vertical arms a', 

 the yokes ,- and ,/. one of which is journaled to the lower 

 endof the brace ii' in fnmt of the vertical axial plane of the 

 wheel, and the other journaled to said brace in rear of said 

 axial plane, and the rotating heail-blocks /; /;, all arranged 

 to operate substantially as set forth. 



No. 224,820.— JOEL ELAM, THOMAS P. ELAM, 

 and JOHN A. ELAM, Greenville. \i.\..— Sulky- Ploughs. 

 — February 24, 1 880. Filed April 25, 1S79. 



Claim. — The combination of the axle A, having down- 

 wardly-projecting arms B C, placed at ah angle of about 

 sixty or sixty-five degrees to each other, tongue J, brace K, 

 connecting the tongue with the rearward-extending arm B, 

 bail L, hinged upon the spindle of arm B, plough M N, 

 pivoted upon the forward end of said b.iil, furrow'-wheel E, 

 and adjustable transporting-wheel H, all arrangeil and 

 operating substantially as and for the purpose set forth. 



No. 225,105— FRANKLIN C. BRYAN, Winona, 

 Ultiti.— Sulky- Ploughs.— Afarch 2. 18S0. Y\\ed. January 

 6, 1880. 



Claim. — In a reversible sulky-plough, the combination of 

 the frame A and independent crank-axles E E', having 

 separate operating- levers /, with the right and left ploughs 

 G G' and their beams F F', independent plough-supporting 

 cranks K K', having separate operating-levers I, and suita- 



