15E 



WHEEL OR SULKY. 



[PLOWS.] 



in;; provided with X\ui vi'rLicnl.|:in-«orKiiidfc8, 

 and it s;nido-t»ti' provided with n rih adapted to 

 ■l)p rt'ctivfd within si fintovo in oim of the ver 

 ticnl jaws or guiih-^, of a roller journnled on a 

 stud attached to oticot thy Jaws or giiidos,niid 

 aciow-bill adapted locnjiago with said roilei 

 and lo be inoveil to Ihu n;iht or left and niise 

 an<1 lower llie plow-beaiii, substantially as set 

 forth. 



10. The combination, with a guide and a spin- 

 (lle-Iranie provided with a gaideway and a rack, 

 of a recessed cor wheel adapted toengaKO with 

 the raeli, and a coiled spring located in the re- 

 resM of the cog-wlieel and having its itmoreud 

 lixedand its outer eml engaged with a lifting- 

 lever the inovetnenlsof which conirol those of 

 (he coj,'-wlic<'l. 



11. In a snlky-plow, thoeonibination, with a 

 guide having a spindle connected therewltk 

 and a guide-bar, of a cog-wheel niesliitig with 

 H rack on Ihi' guide, and a sprnig one end of 

 which isfiM'd and its outer end connected with 

 the lifiin;: Ii-vci, sniistatilially as set forth. 



\\i. Tile finn lima tiiHi, with aguidc and a spill - 

 dlc-fnuneprovid*'dwilhaguidewayandaraek, 

 <lf a recessed cog-wheel, and a einled spring lo- 

 cated in the rei-es.sof the wheel anil having its 

 inner end li.\eil ami its outer end interposed be- 

 tween two lugs on the face of the wheel, suftj- 

 eient s|)ace being left, between the said lugs and 

 spring to allow it loeoil and uncoil to a limited 

 degree indepemleii t of Ihe motion of the lifting- 

 lever. 



13. In asulk.v-plow, the combination, with a 

 lever adapteil to be retaineil in desired adjust- 

 ment by engageuieiit. with a sector secured to 

 the foot-rest, of a brace connecting atiid lever 

 and the laiMl-siile-wheel bearing, and a guide 

 plateaiid a bearing-pIate secured, respectively, 

 to the wheel-fianie and llie plow-frame, and 

 adapted to have pivotal luovemeut upon each 

 other when (lie lever aforesaid is oscdlated. 

 '247,446.* JAMES WARD and RUFUS 



WASHBURN, llaiMllev. Tex;i-. Snlkv- 



(.:aiTiiH.-o lor l'^.^v^. S.-pt. ;20, l.S,S 1. Kilcd 



.Ian. -Ji";, ISSU. 



In a sulky-plow, the combination of the ion- 

 gitndinal bar A, the transverse front bar, C 

 the longitudinal bar B, having rear outward 

 ly -projecting arm, IJ', and caster - wheel Q, 

 mounted therein, the short longitudinal bar 

 I), having a front plate, K, connected with the 

 bar B, and the pivoted plowhangeroryoke H, 

 arranged between the bars B 13, with the 

 ground or bearing wheel, draft-tongue, and 

 devices lor raising and Ibwering the plow- 

 hanger and bearing- wheel, as and for the pur- 

 pose set forth. 

 247 630. JOHN L. GEBNSEY, Mnplc 



(iivvr. Mm. Siilk\-rh.w. Sept. -27, 1S81. 



Filr.l .hll\ II. ISM. 



1. The combination of the beam E, tongue 



F, pivoted thereto, lever (, hanger o, plow-beam 

 C braces ff A, attached to the bent axle B by 

 means of the bearing- blocks c d, and bolt or 

 loop i, segment-plate having heel/, and lever /.-, 

 the said lever being rigidly secured to the axle, 

 whereby the aslo may be caused to rock, sun- 

 BUntiaily as sliown and described. 



2 Tlie a\lo B, made in two parts, the two 

 i>arts being connected to the lever k,in com- 

 bination with the segment-plate e, having heel 

 /; braces g and A, and bearing-blocks erf, the 

 heel/, braces <i h, and ben ring-blocks c d being 

 fastened together in iiny suitable manner, 

 wherebv the asle can be rocked or rotated, 

 thereby raising or lowering the plow without 

 di.stnrbiug the sulky-fnime, substantially as 

 described. 



249,020- EBENEZER B. DANIELS 



Liiun-tv Towurtbip. Tinga County, Pa 

 Snikj-l'low. Nov. 1, 1881. Filed Mar 

 24, 1881. 



1. Tho combination of the frame A, plow- 

 beam K, having clevis w', centrally-pivoted 

 foot lever or frame N, and adjustable connect 

 ing-rod M, substantially as set forth. 



2. The combination, with the frame A and 

 plow-beam K, of the bail B, having Bsed bear- 

 ing c at one end and the notched sliding block 

 d at the other end, the lever n, with toothed 

 scruont h, and tho lever F, loosely attac.heil 

 to its socket on the bail to allow limited rise 

 of Uio plow when the lever is locked, all sub 

 stantiftlly as shown and described. 



249,501. EDWIN M. CARROLL, I'itts- 

 Inrd, Mieb. Snlky-l'low. Nov. 16,1881. 

 Filed Oct. 10, 18S1. 



1. The double-crank shaft o, having oppos- 

 ing cranks, and the laterally -rocking bar A-, the 

 latter firmly clamped to the beam, in combi- 

 nation with the vertically ■ sliding blocks e, 

 loosely fitted to the parts rf of the frame c, and 

 artieulating guide-rods A, provided with sup- 

 ports for the ends of the rocking bar k, siib- 

 stantially as and for the purpo.so described. 



2. Thecombmation of the double-erank shaft 

 o, having opposiugcrank(>,connectingpitmen, 

 sliding blocks p, and frame c d, substantially 

 as described. 



3. The combination of the ciMuk-shafti', pit- 

 mau rf', clamping device t* I' in', articnlatiug 

 guide-rods /(, bar k, and longitudinally-sliding 

 blocks^, substantially as and for the purpose 

 described. 



4. In combination with the beam i, the clamp- 

 ing device consisting of the bar c', provided 

 with perforated ears e^, tbe screw - threaded 

 hooked eyebolts /', link w', and nuts jt', sub- 

 stantially a«.deB(!ribed. 



5. The clam[i / m and plow-beam i, in com- 

 bination with thelateralfy-rockingbarA.-, blocks 

 )', and guide-rods. /(, substantially a-i and for 

 the purpo.se described. 



G. Thccombiuatiou of thcbar A',havingboth 

 a rolling and rocking motion, beam i, articu- 

 lating guide-rods li, longitudinally - sliding 

 blocks ,;, vertically-sliding blocks «■, frame c rf, 

 audcraiik-sliafto, having iippr)singeraid\s, sub- 

 stantially as described. 



7. The two loosely-fitted sliding blocks e, 

 connected to the plow-beam ami frame c rf, and 

 to the double-crank sliaftby suitable interme- 

 diate means, and operated by a lever from (he 

 driver*sseat, whereby onesli4ing block is raised 

 and the other lowered simultaneously, and the 

 plow thereby winged or leveled, substantially 

 as described. 

 249,509. GEORGE T. DRAKE, Indian 



np(»lis, Ind. Wheeled Plow. Xo?. 15, 



1881. Filed Ai.ril 13, 1881. 



1. In a snlky-[)low, tho combination of an 

 asle having a central crank, a plow monnted 

 loosely upon said crank, and a spring acting 

 upon tho shaft to rotate its crank. 



2. In a sulky -plow, tho combination of a 

 main axle provided with a central crank, and 

 end cranks with' ground- wheels attached, a 

 plow sustained directly and loosely upon the 

 central crank, and a spring connected with and 

 tending to rotate said shaft. 



6. Id a sulky- plow, the combination of a 

 draft-frame, a supporting-axle provided with 

 a central crank, and with end cranks having 

 wheels thereon, a spring tending to rotate the 

 asle, and a hand-lever and locking device, sub- 

 stantially as shown, for rotating andaecuriug 

 the axle. 



4. In a sulky plow, a rolling axle provided 

 with a crank, a plow mounted directly and 

 loosely upon said crank, and a sqiring con- 

 nected directly with the crank and tondrng to 

 raise tho plow, substantially as shown. 



5. The combination of tho frame, the axle 

 provided with cranks at the middle and the 

 end, the ground-wheels, the t)low attached to 

 the crank of the axle, and the extension-spring 

 extending from the plow-supporting crank to 

 the frame. 



G. In a sulky-plow, a rolling asle provided at 

 oueend with a fixed crank with ground-wheel, 

 atthemiddle with a plow-supportingcrank, and 

 at the ni)posite end with an adjustable wheel- 

 carrying crank, in combination with a spring 

 tending to rotate the axle, and two independ- 

 ent levers and locking devices, one attached 

 to the main asle and the other to the adjust- 

 able crank. 

 249,869. GEORGE APPLEGATE,Yon- 



callu. Oregon. Salky-Plnw. Nov. 22, 1881. 



Filed Juno 1,1881. 



1. Tho plow A, formed with the auxiliary 

 beam O, in condnnation with the hinged beam 



B, and the lever D, substantially as and for 

 the purpose.^ specified. 



2." In a sulky - plow, the combination, with 

 the upright G, hinged at the lower end to the 

 Lindsideof the plow, of the plate F, hinged to 

 the side of the plow-beam, and the axle-plate 

 H, secured to the upper end of said upright, as 

 shown and described. 



3. .The beam <' and the hinged beam B, unit- 

 ed and operated by the lever I», in combina- 

 tion with the hinged upright (i, plate F, and 



tho sulky-axle H, substantially as and for tho 

 purposes specifle*!. 



4. The hinged beam B and tho asle U, in 

 combination with the tongue K, counectiug- 

 bar L, and chain or similar *;oiinectitig device 



j, substantially as and for the pnri»o.se specified. 

 .">. The npiiglit fr, adapted to be hinged to 

 the plow, ill combination with the axle H and 

 the sulky, and the plate F, substantially as an*! 

 for tlie iini|Hises specified. 



249,890. LEROY BROWN, Waitsbui-ir. 

 W.u-li. !Sulkv-IMow. Xov. 22. 1H81. Filed 

 April 1(J, 1881. 



1. Ill A sul!cy-i)low, the combination, with 

 the benf bar I>. the tongue U, and the lever 

 O, of the keeper N, the 8|)ring-cateh Q K, and 

 the ratchet and pawl U V, substantially as 

 herein shown and described, whereby the 

 tongue can be readily adjusted, securely held, 

 and conveniently released, as set forth. 



2. In a sulky-plow, the combination, with 

 the rotary colter ( and the plow-beam g, of the 

 standard" formed of two bars, ir, secured to 

 each other by a bolt, j, passing through a hole 

 in the one bar and a slot in the other, substan- 

 tially as hetein shown and described, where- 

 by tbe said colter can be readily adjusted into 

 line with the draft, as spt forth. 



251,271. RICHARD MILLS, Bnflulo, Ills. 

 (Jatiu^-l'lnw, \K-i:. 20. 1881. Filed July 

 22. ISHl. 



1. In a gang-piow, the combination, with 

 the plows D, of the guards F, secured upon the 



furrow edges of the said plows, substautially 



as shown and described, whereby thefurrow- 

 I slices are prevented from slipping off the raold- 

 I boards before reaching the proper point. 

 \ 2. lu a gang plow, the plows D, constructed 

 I withforwardly-projecting prongs B upon their 



shears and guards F upon their mold-boards, 

 I substantially as herein shown and described, 

 j whereby the furrow-slices will be raise<l and 

 i kept upon the mold-boards till they reach the 



proper point to be turned, as set forth. 



3. In a gaug-p'ow, the combination, with the 

 plow-beams U, the plow-standards U,an(1 tho 

 colter -standards J, of the bars I and the 

 swiveled screws L, substantially as herein 

 shown and described, whereby the said plows 

 and colters can be adjusted to work at any de- 

 sired depth in the ground, as set forth. 



4. In a gang-jdow, the combioation, with the 

 plow-beams 11, the frame C, the pairs of staud- 

 ards N, and their connecting-bar O, of the 

 rigid inclined levers Q, the hinged bars R, hav 

 ing books S and links T, and the pins V. 

 substantially as herein shown and described, 

 whereby the plows can be locked in either 

 a working position or when raised from the 

 groond, as set forth. 



! 5. Id a gang-plow, the combioation, with the 

 side bars, U, of the frame, the standards N, 

 and the rotary colters K, of the levers V, the 



. link W, and the longitudinally-slotted verti- 



I cal colters X, substantially as and for the pur- 



I pope set forth. 



\ 251,287. OHARIES H. REMINGTON, 

 j (iilnn,Cai. Plow. Dec. 20, 1881. Filed 

 j July 2;i, 1881. 



j The combination ot the tongue B, uuving 

 ! fastened to its inner-end the plates b, pivoted 

 at b' to the supplementary beam c*, and having 

 formed upon them lugs or projections fc^, with 

 tbe supplementary beam e', to wliieh is secure- 

 ly attached the beam C, and the lever I), piv- 

 i:cd to the lugs &* and to the 8U[>pIefuentary 

 beam c', au<l ranging upon tbe toothed rack d', 

 substantially as described and set forth. 

 251,357. CHAS. F GODDARD, West 

 Mit.liell. Iowa. K(dler I'low. Dee, 27, 

 1881. Filed Dec 20. 1880. 



1. In combination, a taud-roller, (J, a disK- 

 colter, D, attached thereto, beam B, and a plow 

 supported by the roller,substautially asshown 

 and described. 



2. In a plow attached to a land-roller, the 

 combination of the roller C, Imviug disk-colter 

 D, shaft O, beam B, plow standard S T. and 

 plow A, substantially asshown and described. 



3. The lever L and wheel \V, in combina- 

 tion with roller <J, disk D, beam B, shaft O, 

 and plow A, substantially as shown anil de- 

 scribed. 



251,445 JULIUS KONIG, Snydi-rsburg, 

 Md, Flow. Dee. 27, 1881. Filed Autr. 



4. issl, 



III combination with the poiforated ad,just- 

 able beam and mold-boards, the front truck 

 having wheels of unequal size, a fifth wheel 

 adapted to be secured to the b am, anil an up- 

 wardly -project ing king-bolt, as Hud for the pur- 

 pose set forth. 



