1554 



WHEEL OR SULKY. 



[PLOWS.] 



i. Tbe quadrant A*, cast in one piece and 

 provided with iiotclies in its peripliery, boles 

 P', And integral stud U', in cuinbiualinn witb 

 IcveriS M N, clamp X', prtwl Y', and pin S', 

 substantially asset furtb. 



5. The step K', attaulied to tlie plovrbcam 

 D, and made adjustable by nieansot'clatnpl/, 

 incline N', lip O', and bolt M', fiubstftotially 

 assetforMi. 



6. In a wbeel-pluw, tbe combination, witb 

 the plow-beam, of tbe oKcillnting or vibrating 

 Ieveliugdevifi-.I,MirougIi wbii-li tUe ptow-beani 

 passes, saiii device being pioviilcd with a 

 wtdfje-sbaped boI»i and si-t-srrt'ws for tbe ob- 

 lique adjust incnt (iTtbe bean),subH(antial]y as 

 set forth. 



7. In a wheel plow, the conibinanoii of the 

 seat-iii-cii, Ibe stationary fiirrow-wlicel axle, 

 fliid tbe land-wheel axle, attached to the slide 

 V^, and both connected to and liy said seat- 

 arch, and eiicb ofierating independent of the 

 other, the slide carrying the land-wheel being 

 locked to the Kent arch by loeauH of cam-lever 

 C^ anil block 1>-'. 



H. In eomhina'ioii with tbe axle of a wheel- 

 plow, the pendant G^, sn^pended from said 

 aslo and ciirrying a conic;il roller tbe axis of 

 which is turned outward, substantially as set 

 forth. 



t). The pendant (P, attached to (be axloand 

 provided ^^illl the shield P, in combination 

 with a conical roller arranged witb the side 

 next the land perpendicular, substiintially as 

 set lorth. 



10. In combination with lever M, clamp X', 

 and pawl Y', the set -screw Z', for the par- 

 pose specified. 



11. Tbe scat-arch H, provided with integral 

 double socketed bearings Z Z, in combinatiou 

 witb Ihe tongue-timbers A' A", permanently 

 fixed therein, for tbe purpose specified. 



13. In combination witb the seat-arcb, pro- 

 vided witb bearing Z, and tongue-timber A', 

 tbe foot-rest 1/ and seat-spring, thewhole be- 

 ing held together by means of the bolts M'. 



13. In a wbeel-plow, tbe combination, with 

 the plow beam I> and bail 0, of tbe pivoted 

 hanger I and oscillator J, forming a direct 

 conned ion between Siiid plow-beam and bail, 

 the beam passing through the hanger and os- 

 cillator, the said hanger and oscillator being 

 provided with corrngalions X,and being held 

 together by means of the bolts Waud U, sub- 

 stantially asset forth. 



254,555. CHARLES E. KNEBERG, Mo- 

 line, Ills., assignor of two-thirtis to the 

 Moline Plow Co., same place. Sulky- 

 Plow. Mar. 7. 1882. Filed Jan. 3. 1882. 



1. In a plow, the combination, with tbe hand- 

 lever, of a pawl, a locking device for the lever, 

 and a finger-lerer attached to tbe band-lever 

 and connected witb tbe pawl and locking de- 

 vices, Sttbst-ftntially as described, so that upon 

 beiug moved in one direction the finger-lcrer 

 operates the locking device only, and upon be- 

 ing moved in the opposite direction it operates 

 both Ibe locking device and the pawl. 



2. In combination with the hand-lover, its 

 locking device and pawl, the pivoted finger- 

 lever connected at oue end with the pawl and 

 at both ends with the locking device, substan 

 tially as described, whereby tbe flnger-lerer ie 

 adapted to operate the pawl alone or both the 

 pawl and the locking device, accordingas it is 

 moved in one direction or the other. 



3. In combination witb the band lever, a fin- 

 ger lever adapted to swing in opposite direc- 

 tions from its normal position, a locking de- 

 \ icb for the lever, a lifting-pawl attached to 

 the lever, a connection, substantially such as 

 described, exteruling from the finger lever to 

 the pawl, and double connection from the fin- 

 ger-lever to the locking ilevice. 



4. In combination with the stationary rack- 

 'biir, the hand lever, it.s pawl, Ihe locking de- 

 vice mounted upon tbe lever and engaging 

 with tho rack-bar, Ibe central i)ivoted finger, 

 the lever, the rCil 6, and tbe slotted rods cd. 

 264,558. AUGUST LINDGREN, Moline 



Ills., assij^iiur of two-lhirds to the Molint 

 Plow Ci'., Ranie place. Sulkv-Plow. Mar. 

 7, 18S2. Kiled Jan. 12. 1882. 



1. In combinatiou witb the hand lever, the 

 arm h, pivoted thereto, and tho finger-lever d, 

 pivoted to said arm, suGstanliully as described 

 and shown. 



2. In combiniitioa with the hand-lover, the 

 arm pivoted thereto, and the linger lever piv- 

 oted to tho arm, connecting devices, substan- 

 tially such as shown, extending to the pawl, 

 and I ho locking device. 



3. Inasnlky-plow.lhc combination, with the 



rack-bar and tbe ratchet-wheel or equivalent" 

 lilting device, of a band-lever, tho arm pivoted 

 to said lever, the finger-lever pivoted to tbe 

 arm, and tbe two rods extending from tliefln- 

 ger-iever to the pawl, and tbe locking device, 

 sabstantially as shown. 



4. In a sulky-plow, the combination of tbe 

 hond-lever, its locking device,a pawl, a finger- 

 lever mounted upon the band-lever, Hod ar- 

 ranged, sabstantially as described, to swing 

 apondiflcrent centers, according as it is moved 

 to oue side or the otiirr of its normal position. 



5. The combination of the band-lever, its 

 pawl, and a locking device, the pivoted arm, 

 the flnger-lever pivoted to said arm, tbe con- 

 necting-rods, and a spring, substantially as de- 

 scribed and shown. 



G. In combination with a hand -lever and 

 two co-operating rods, a finger lever pivoted 

 to the baud-lever, andarrangetl toswiogfrom 

 different centers, according as it is moved to 

 one side or the other of its normal position, 

 substantially as described and shown. 

 264,620. FRANCIS CREMER. St. Louis, 



Mo. Combined Flow and Cultivator. 



Mar. 7, 1882. Kiled Sept. 12, 1H81. 



1. An arch • axle in which are combined 

 wooden vertical side pieces, c c, wedge-shaped 

 or key piece c', metal plate c*, angle-iron c^, 

 and short axles B B, as set forth. 



2. Tbe combination, with the carriage and 

 plow, made substantially as set forth, of the 

 uprights P P, connected by their upper and 

 lower ends to tbe carriage and jilow, respect- 

 ively, and furthermore connected to the former 

 by a coupling, Q Q' Q', as and for the purpose 

 set forth. 



3. Tbe rocking beam F, connected to the 

 cross-beam E, substantially as set fortb, and 

 forming support to the forward and rear euds 

 of the plow-beam. 



4. Tbe adjustable connections U l, in com- 

 bination witb tbe plow-beam H, rocking beam 

 F, and cross-beam E, subslantinlly as shown 

 and described. 



5. The wheel J, connected to the^rear end 

 of the beam F, and made, substantially as set 

 forth, witb grooves on each side lor receiving 

 tbe adjnsting-rope R, and a central groove 

 having cogs engaging with the rack I to raise 

 the plow. 



G. The combination of the rope K, wheel J, 

 beam F, having pulleys A-', and pulley L, as 

 set forth. 



7. Tbe combination of pulley L, sliding le- 

 ver M, locking-lever N, rope K, wheel J, rack 

 bar I, and plow-beam H, as set forth. 



8. The combination, with tbe carriage and 

 plow, made substantially as set fortb, of the 

 uprights P P, connected by their upper and 

 lower ends to the carriage and plow, respect- 

 ively. 



9. Tbe combination of angle-iron c\ yoke C, 

 tongue L', and nprigbts P P, adjustable in said 

 angle-iron, as set forth. 



254,723 GARLAND B. ST. JOHN, 

 Cedar Kapidw, Inwu. I'lnw Truck. Mar. 

 7, 1882, Fili'd .Sept. 27, 1^81. 



1. Tbe seat O, moauted on parallel hinged 

 sapports e e, regulated by suitable stops, com- 

 bined witb the chain c, sheave a, segment I, 

 and tongue J, snbstantially as shown and de- 

 scribed. 



2. The combination of the landside- wheel 

 F, pivoted axle K, lever L, and quadrant o, 



or tbeir equivalents, aubstaotially as aud for 



the purpose set forth. 



256,155. FERDENAND FENSKE, Mil- 

 waukee, \V\s. Plow. Mar. 21, 1882. 

 Filed Nov. 22. 1881. 



1. The yoke F and sleeve I. in combination 

 with tbe draft-chains H H, and the axle X, 

 provided with the perforations n, the said 

 chains being rigidly attached at one end in 

 l)erforations in tho outer ends of tbe yoke F, 

 and adjustably attached at their other ends in 

 any two of the perforations ?i, as desired. 



2. The beam A, having open beadL,incom- 

 bination with cross-piece N, having yoke K, 

 the standard B, having perforations e e, and a 

 supporting device adapted to enter the perfo- 

 rations. 



3. Tbe head L, having an opcin horizontal 

 extension in which is a threaded opening, in 

 combination witb cross-piece N, screw-bolt (7, 

 and standard B. as set forth. 



-1. The axlo X, having uprights g g, perfo- 

 rated to receive the rock-bar T, in combination 

 with standanl It, adjustably secured thereon 

 by menus of stinare slot in lower end of said 



'standard, and tbe wedge n and set screw, as 

 described. 

 255.391. GILPIN MOORE, Moline, Ills.. 



BHuignor to Deere & Co., same place. 



Suikv-PIow. Mar. 21, 1882. Filed Xnv. 



4. 1881. 



This invention relates to that class of plows 

 wherein by tbe locking of the wbeeU the plow 

 may be raised by tho team ; and the novelty 

 consists in tho construction and coiubination 

 of several p;iits, all as will now be set out and 

 explained. 



1. The combinatiou of the wheels B B', the 

 axle D D', the plow-beam t~, and ratchet F 

 with the lever G, pawl D, lever I, rod J, part 

 K, rod L, and spring O, snbstantiallv as set 

 forth. 



2. The ooinbinalion of the wheels B B', axlo 

 D D', and ratchet F with the lever G, the part 

 K, tooth A:*, the segment M,aiid spring O, sub- 

 stantially as set forth. 



3. lu a wheel-plow, as described, tbe combi- 

 nation of tho axle D D', levers (1 and I, and 

 rod J with part K. tooth fc*, rod L, spring O, 

 and segment M, substantially as described. 



4. The combination of tbe axte D, tlie lever 

 G, having the boss y'', the cam N, and the pawl 

 H, snbstuntially as ilescribed. 



5. The combination of the axle D, tbe lever 

 G, the wheel B,tb6 ratchet F, the pawl H, the 

 cam N. the segment M, the part K, and tootl 

 k*, substantially as described. 



G. The combination of the axle D, tbe wheel 

 B, tbe ratchet F, the lever, G the boss g^, the 

 cam N, and means for keeping the cam from 

 turning on the boss. 



7. The combination of tbe loose cam N and 

 the rod P, substantially as aud for tbe purpose 

 described. 

 255,657. WM. B. YOUNG, Alton, Ills., 



assignor t(^ the Hapgnod Plow Co., same 



place. Sulky-Plow. Mar. 28, 1882. Filed 



Dec. 28, 1880. 



1. in a sulky-plow, a central bail having 

 pivotal connection with tbe axle, and an arm 

 extending connecting by a link witb tbe op 

 erating-lever, a plow mounted loosely upon 

 said bail, and a spring acting upon the said 

 bail in rear of the axte to elevate the plow, snb 

 stantially as shown. 



2. In a sulky-plow, tbe combination of an 

 axle elevated in tbe center, with perpeiulicu- 

 lar sides and borizoutal arras, one arm extend 

 ing and having the wheel rotating thereon, a 

 central bail having pivotal connection with the 

 axle, and an arm extending connecting by s 

 link with tbe operaiing-lever, a plow mounteil 

 loosely upon said bail, a spring having onoend 

 connected to the bail in rear of the axle aud 

 the other end connected above to tbe frame or 

 tongue, and tbe spring acting upon the bail to 

 elevate the plow, substantially as and for the 

 purpose set forth. 



265,977. THOS. T. HARRISON, Au- 

 liiey, Kan. Sulkv-Plnw. April 4, 1882. 

 Filed Oet. 27, 1881. 



In a sulky-plow, tbe combinatiou, witb the 

 cross-bar M, having curved exten.sion I upon 

 its land-side end, and the bar L, attached to tbe 

 upper end of tbeland-sideaxleD, of the keeper 

 2 and tbe stops3,substaotially as herein shown 

 and described, whereby tbe machine can be 

 turned at a right angle without riiising the 

 plow from the gronnd,as set forth. 

 256,422. MYRON G. WOOD, ('hiiivli's 

 CnriRT.s, and WALTER C PRATT, Hud- 

 son, Mich. Sulky-Pluw. April 11, 1882. 

 Filed Mar. 9, 1882. 



1. In combination witb the bent axle and tbe 

 tongue or pole of a sulky-plow having a ratch- 

 eted segment, tho angle-lever fulcrumed to tho 

 segment and loosely connected to tho forward 

 part of tbe plow-beam, the curved lever ful- 

 crumed to snid segment aud provided with a 

 slotted head adapted to play upon a bolt upon 

 Ihe angle-lever, and the pivoted frame D, pro- 

 vided with a Iriction-roUer and pin between 

 which thecnrved lever plays, substantially as 

 aud for the purpose specified. 



2. In combination witb tho frame D. pivoted 

 to the bent axle, and tbe segment T at tbe 

 rear thereof, the plow-beam provided'with tho 

 yoke U V Y, tho bell crank, connecting-rods, 

 and tbe lover D' for operating the plow to 

 wing the same, substantinlly as and for the 

 purposes set forth. 



3. In combinatiou with tbe bent axlo and 

 plow-boam, the angle-lever I', ftilcrumod to tbe 



