168 Centaur ; 



BREECHBAND. 



(van.) 



Body (made up) 3' 8" x 2 J" (ring to tug 8 J") 



4 Tugs 6"xlf' 



2 Hip straps 4' 2" x 1;^ each, stout 



2 Shaft straps 3' 0" x If each, stout 



HAME STRAPS. 



(van.) 



Bottom strap 2' 0" x 1" (roller buckle) 



Top strap 1' 10" x 1" (roller buckle) 



No Traces. Hames with chain and spring hook preferred to all 

 Van sets. 



REINS. 



(VAN.) 



15' X V each side Billets 1' 0" x V 



AVERAGE WEIGHTS OF LEATHER WORK AS "CUT 

 OUT" FOR SET OF VAN HARNESS, 16B). (SOLID). 

 LESS HAND PARTS AND TRACES, AS ABOVE:— 



TROTTING HARNESS. 

 (4JK)., including leather work and furniture.) 

 Breast collar made up — 



Body, 3' 0" X 1 J'' ; traces run round same and spliced in centre, 

 4" traces rounded 5' from end of breast collar, with buckle at end, 

 and r 10" X V billet. 



Wither strap, sunk stitches, 2' 8" x f " tapered to f " 



Martingale, crupper split 8", and made 3' 10" x 1^-" tapered to J", 

 well tapered down, linseed dock sewn on end, thick in centre. 



Pad, all in one piece, 3' 8" x 1 J" (known as a leather plate), no 

 tree or plates. Pad consists of a stout piece of leather through 

 which the backhand runs, backhand hole being 8" each side of 

 centre socket ; terrets are sewn on top lining and well blocked 

 up ; point se^vn on each end of flap 1 2" x J'' ; good loose girth, 

 buckle at each side, 1' 7" long x 1-J" ; bridle, no winkers ; all 

 strapping J" wide reins ; strong 1" and -J" strip run through ; 

 hand parts under side as connected loops for grip. Average 

 weight of ordinary trotting harness, 65). 



The Author tvill siippli/ any patterns desired, in either zinco, 

 leathery or paper^ or will send by post a model set, as above. 



