Self-correcting Harness 



205 



Choose a sash-cord or soft quarter-inch rope about 

 twelve feet long, a soft three-eighths inch rope about 

 six feet long, a light pulley, four straps one inch wide 

 and about two feet long, and two rings two inches 

 in diameter. Place the long rope through the eye 

 of the pulley and the short rope through the pulley 



Fig. 57. — Self-punishing harness. 



itself. Draw the short rope backward from the front 

 under the girth so the pulley will rest just back of the 

 girth (Fig. 57). Buckle the straps above and below 

 the hocks and through the rings; tie, by half -hitches, 

 the short rope into these rings. Next grasp the ends 

 of the small rope, pass each to the rings of the bridle 

 bit, at either side, passing through the rings from the 

 outside, then pass the small ropes up over the head, 



