POULTRY FOR PROFIT 



169 



a screw eye 1% inches from the end and % inches 

 from the sides. On the upper side tack two rawhide 

 strips using a small staple or nail for each. The end 

 of the strap will be 2 inches from the end and % 

 inch from the side of the door. 



Place the door in front of the trip-board, the 



screw eyes down; push the rawhide strips through 

 the holes in the trip-board ; turn the boards over and 

 draw the strips up tight then bend the door back 

 over the trip-board until there is full % inch between 

 the boards when laid flat; the strap should then be 

 tacked to the lower side of the trip-board. 



The door and trip-board are put in place by push- 

 ing the iron rods through the sides and the screw 

 eyes. Care should be taken in placing the screw 

 eyes in the proper places. The screw eyes may be 

 adjusted in order to make the door balance properly. 



