56 WOODWORKING 



ten-penny finishing nail thru the board from the front side, as 

 suggested (Fig. 69). If a hand drill is not available, use bit 

 and brace (Fig. 4). 



FIG. 70. Clothes pin which may 

 be used with bulletin board. 



From the back side of the board, drive thru the hole a ten- 

 penny finishing nail and set the head under the surface of 

 the board by the use of a nailset or second nail. 



The bulletin board may be equipped either with a spring 

 clip, as shown in Fig. 48, or with clothes pin (Fig. 70). 



