82 



WOODWORKING 



and fit in bench to slide freely. The bottom of the drawer 

 may be nailed onto cleats fastened to the lower inside surfaces 

 of the sides of drawer. 



64. Working Directions for Dog House (Fig. 120). 



1) Cut 2" x 4"'s to proper lengths for either sills or plates, 

 and one-half the number of studs. 



2) Rip all pieces of 2" x 4" into 2" x 2" strips. 



Rafter 



FIG. 120. Doghouse. 



3) Construct sill and plate frames with horizontal half -lap 

 corner joints, and connect sill and plate frames with studs by 

 nailing thru frames into ends of studs. 



4) Nail on sheathing (fence boards), lapping side boards 

 over ends of end boards. 



5) Beginning at the bottom, cut and nail on siding on sides 

 and ends. 



6) Cut and nail on roof boards (fence boards), allowing 

 space of V between boards. 



7) Shingle roof, beginning at eaves and working toward 

 ridge, breaking joints for every two consecutive layers or 

 rows of shingles. 



8) Cut, fit and nail ridge, facing, corner, base, and trim 

 boards. 



