86 WOODWORKING 



8) Fasten corner angle iron with I" flathead screws to in- 

 side of each end piece to draw tightly to side piece when 

 screwed to it. Drill small holes for screws. 



9) Fasten remaining side of each angle iron to side piece. 

 First place in position, mark for screw holes, and then drill 

 for them. 



10) Fasten strap hinge in manner similar to that used in 

 fastening angle irons. 



11) Drill small holes for staples for corner chain. 



12) Fasten chain and corner clamp bolts by setting up nuts 

 over washers and burr ends of bolts slightly. 



69. Making Tomato Trellis (Fig. 125). 



1) Secure eleven 12' strips of pine, 3" or 3-1/2" wide. Pine 



FIG. 125. Tomato trellis. 

 flooring or 6" pine fence boards ripped in two will be satisfac- 

 tory. 



2) Cut from each of three strips two pieces 5' 0" long. 



3) Two feet from one end of each of the 5' strips, bore a 1/4" 

 hole in the middle of the stock. 



4) Fasten two of the strips together with a 1/4" bolt, using 

 a washer under the head and under the nut, to form one end 

 of the rack. In like manner, make the remaining two sup- 

 ports, one for the opposite end and one for the middle of the 

 rack. 



