SUPPLEMENTARY PROJECTS 



91 



nail bottom ends on runners, one at each end and one in the 

 middle. Toe-nail tops of rafters of each pair together. 



3) Fasten rafters together on each side by three strips (roof 

 stringers) of V x 3" stock. These preferably should be set in 

 (housed) to upper edge of rafters. If so, housings should be 

 cut before rafters are placed in position. 



Ridae. Bo&rds 



FIG. 130. Hog cot. 



4) Lay floor of V x 6" matched lumber, matching outside 

 floor strips to fit around rafters and come flush with outside 

 edges of them. 



5) Erect supports cr studs front and back under end rafters 

 to form framing for door and window. 



6) Toe-nail window framings between studs. 



7) Cover in ends with V x 6" matched siding, resting bot- 

 tom edge of bottom boards on top of runners. 



8) Cover roof with I" x 6", V x 8" or V x 10" boards ver- 

 tically, nailing each to each roof stringer. Cover each crack 

 with a batten (2" strip), first placing ridge boards in place. 



9) Set window and hinge at top so that it may be opened for 



