SUPPLEMENTARY PROJECTS 



95 



2) Lay out, saw and cut all joints on similar pieces. Ex- 

 ample: Two horizontal parts of runners; two front parts of 

 runners; two cross-beams, etc. 



3) Frame together the two parts of each runner, driving 

 dowel in with glue, and toe-nailing runner parts together from 

 top and bottom. 



4) Put cross-beams in place, driving dowel in place in glue 

 and spiking from under side of runner. 



5) Nail long boards of runner frames (bed boards) in posi- 

 tion on each cross-beam and on top of runner. 



Z*4-3-0-' 



FIG. 136. Fence-post mold. 



6) Place corner uprights in place, nailing from both sides of 

 bed boards and runners. 



7) Nail in position all cross-boards front and rear of sled, 

 inside corners of bed boards and uprights, top of uprights. 



Note: Letter each set of boards, and use letter in opera- 

 tion steps. 



79. Fence Post Mold (Fig. 136). 



1) Lay floor on 2" x 4" cleats, as shown in cross-sectional 

 side view. Upper surface of flooring material should be sur- 



