334 BELTS AND BELTING 



numbered holes. Continue the lacing, passing thru the 

 holes in rotation, finally returning to hole No. 1, which is 

 also marked 15 and 25. The lacing will now be double. 

 Care must be taken to pass the lacing back to 7 the first 

 time it comes thru 8 in order to get it double at the end. 



FIG. 333. Position of holes for various laces. 



It should be tight and straight. In passing thru a hole 

 the second time or the third, as in case of hole No. 1, use 

 an awl to enlarge the hole slightly. After passing the end 

 of the lace thru hole No. 1, coax it thru holes and 00, 

 leaving the end extending with the first one. Pull these 

 ends thru and level with the belt, cut half-way thru the 

 lacing at an angle with the lace. This forms a notch in 

 each end of the lace to hold it from slipping thru to the 

 pulley side of the belt. 



