DISTILLED WATER. 127 
ends free in the laboratory about 1 foot above a deep sink. ‘The sides and top of 
the boiler, the copper catch basin, and the 34-inch block-tin pipe leading to the con- 
denser are all coated with 3 inches of best non-conducting magnesia covering. 
The catch. basin, designed to hold back solid particles carried up with the steam, 
‘is 9 by 12 inches and is made of }-inch copper, securely riveted and soldered with 
tin solder. It is bolted down to the flat brass top and a steam-tight connection 
Fig. 119.* 
is secured by means of a red rubber gasket. The heavy brass top (7) is tinned on 
the inner surface and is bolted securely to the iron flange on the top of the boiler by 
means of 18 screw-bolts. The junction is made steam-tight by means of a corrugated 
*Fic, 119—The Reinhold-Giltay microtome arranged for cutting celloidin or very hard paraf- 
fin sections. The machine is very solidly and accurately constructed out of the best materials, 
and, in addition, provision is made by means of set-screws for compensating the wear due ‘to long 
use. The device governing the thickness of the sections is especially ingenious. This particular 
machine has been in constant use by various persons for over four years, and nothing has been paid 
out for repairs. With good-use it ought to last a lifetime. About one-fifth actual size. 
