CONGRESS, UNITED STATES. (DuxiEB ON IMPOBTS.) 



199 



Bixty inches square, thirty-five cents per square foot ; 

 all above that, sixty cents per square toot. 



But no looking-glass plates or plate-glass, silvered, 

 when framed, shall pay a less rate of duty than that 

 imposed upon similar glass of like description not 

 framed, but shall be liable to pay, in addition thereto, 

 thirty per centum ad valorem upon such frames. 



Porcelain and Bohemian glass, chemical glassware, 

 painted glassware, stained glass, and all other manu- 

 factures of glass or of which glass shall be the com- 

 ponent material of chief value, not specially enumer- 

 ated or provided for in this act, forty-five per centum 

 ad valorem. 



SCHEDULE 0. METALS. 



Iron-ores, including manganiferous iron-ore, also 

 the dross or residuum from burnt pyrites, seventy-five 

 cents per ton. Sulphur-ore, as pyrites, or sulphuret 

 of iron in its natural state, containing not more than 

 three and one half per centum of copper, seventy-five 

 cents per ton: Provided, That ore containing more 

 than two per centum of copper shall pay, in addition 

 thereto, two and one half cents per pound for the cop- 

 per contained therein. 



Iron in pigs, iron kentledge, spiegeleisen, wrought 

 and cast scrap-iron, and scrap-steel, three tenths of 

 one cent per pound, but nothing shall be deemed 

 scrap-iron or scrap-steel except waste or refuse iron 

 or steel that has been in actual use and is fit only to be 

 remtmufactured. 



Iron railway-bars, weighing more than twenty-five 

 pounds to the yard, seven tenths of one cent per 

 pound. 



Steel railway-bars and railway-bars made in part 

 of steel, weighing more than twenty-five pounds to 

 the yard, seventeen dollars per ton. . 



Bar-iron, rolled or hammered, comprising flats not 

 less than one inch wide, nor less than three eighths 

 of one inch thick, eight tenths of one cent per pound ; 

 comprising round iron not less than three fourths of 

 one inch in diameter, and square iron not less than 

 three fourths of one inch square, one cent per pound ; 

 comprising flats less than one inch wide, or less than 

 three eighths of one inch thick ; round iron less than 

 three fourths of one inch and not less than seven six- 

 teenths of one inch in diameter, and square iron less 

 than three fourths of one inch square, one and one 

 tenth of one cent per pound : Provided, That all iron 

 in slabs, blooms, loops, or other forms less finished 

 than iron in bars, and more advanced than pig-iron, 

 except castings, shall be rated as iron in bars ; and pay 

 a duty accordingly ; and none of the above iron shall 

 pay a less rate of duty than thirty -five per centum ad 

 valorem : Provided further, That all iron bars, blooms, 

 billets, or sizes or shapes of any kind, in the manufac- 

 ture or which charcoal is used as fuel, shall be subject 

 to a duty of twenty-two dollars per ton. 

 t Iron or steel tee rails, weighing not over twenty- 

 five pounds to the yard, nine tenths of one cent per 

 pound ; iron or steel flat rails, punched, eight tenths 

 of one cent per pound. 



Round iron, in coils or rods, less than seven six- 

 teenths of one inch in diameter, and bars or shapes of 

 rolled iron not specially enumerated or provided for 

 in this act, one and two tenths of one cent per pound. 



Boiler or other plate iron, sheared or uusheared, 

 skelp-iron, shearea or rolled in grooves, one and one 

 fourth cents per pound ; sheet-iron, common or black, 

 thinner than one inch and one half and not thinner 

 than number twenty wire gauge, one and one tenth 

 of one cent per pound ; thinner than number twenty 

 wire gauge and not thinner than number twenty- 

 five wire gauge, one and two tenths of one cent per 

 pound ; thinner than number twenty-five wire gauge 

 and not thinner than number twenty-nine wire gauge, 

 one and five tenths of one cent per pound ; thinner 

 than number twenty-nine wire gauge, and all iron 

 commercially known as common or black taggers iron, 

 whether put up in boxes or bundles or not, thirty per 

 centum ad valorem: And provided, That on all 'such 

 iron and steel sheets or plates aforesaid, excepting on 



what are known commercially as tin-plates, teme- 

 plates, and taggers tin, and hereafter provided for, 

 when galvanized or coated with zinc or spelter, or 

 other metals, or any alloy of those metals, three fourths 

 of one cent per pound additional. 



Polished, planished, or glanced sheet-iron, or sheet- 

 steel, by whatever name designated, two and one half 

 cents per pound : Provided, That plate or sheet or 

 taggers iron ? by whatever name designated, other 

 than the polished, planished, or glanced herein pro- 

 vided for, which has been pickled or cleaned by acid, 

 or by any other material or process, and which is cold- 

 rolled, shall pay one quarter cent per pound more 

 duty than the corresponding gauges of common or 

 black sheet or taggers iron. 



Iron or steel sheets, or plates, or taggers iron, coat- 

 ed with tin or lead, or with a mixture of which these 

 metals is a component part, by the dipping or any 

 other process, and commercially known as tin-plates, 

 terne-plates, and taggers tin, one cent per pound : 

 corrugated or crimped sheet iron or steel, one and 

 four tenths of one cent per pound. 



Hoop, or band, or scroll, or other iron, eight inches 

 or less in width and not thinner than number ten 

 wire gauge ? one cent per pound.; thinner than num- 

 ber ten wire gauge and not thinner than number 

 twenty wire gauge, one and two tenths of one cent 

 per pound ; thinner than number twenty wire gauge, 

 one and four tenths of one cent per pound : Provided, 

 That all articles not specially enumerated or provided 

 for in this act, whether wholly or partly manufactured, 

 made from sheet, plate, hoop, band, or scroll iron 

 herein provided for, or of which such sheet, plate, 

 hoop, band, or scroll iron shall be the material of 

 chief value, shall pay one fourth of one cent per pound 

 more duty than that imposed on the iron from which 

 they are made, or which shall be such material of 

 chief value. 



Iron and steel cotton-ties, or hoops for baling pur- 

 poses, not thinner than number twenty wire gauge, 

 thirty-five per centum ad valorem. 



Cast-iron pipe of every description, one cent per 

 pound. 



Cast-iron vessels, plates, stove-plates, andirons, sad- 

 irons, tailors' irons, hatters' irons, and castings of iron 

 not specially enumerated or provided for in this act, 

 one and one quarter of one cent per pound. 



Cut nails and spikes, of iron or steel, one and one 

 quarter of one cent per pound. 



Cut tacks, brads, or sprigs, not exceeding sixteen 

 ounces to the thousand, two and one half cents per 

 thousand ; exceeding' sixteen ounces to the thousand, 

 three cents per pound. 



Iron or steel railway fish-plates, or splice-bars, one 

 and one fourth of one cent per pound. 



Malleable iron castings, not specially enumerated 

 or provided for in this act, two cents per pound. 



Wrought-iron or steel spikes, nuts, and washers, 

 and horse, mule, or ox shoes, two cents per pound. 



Anvils, anchors or parts thereof, mill-irons and 

 mill-cranks of wrought-iron, and wrought-iron for 

 ships, and forgings of iron and steel, for vessels, 

 steam-engines, and locomotives, or parts thereof, 

 weighing each twenty-five pounds or more, two cents 

 per pound. 



Iron or steel rivets, bolts, with or without threads 

 or nuts, or bolt-blanks, and finished hinges or hinge- 

 blanks, two and one half of one cent per pound. 



Iron or steel blacksmiths' hammers and sledges," 

 track-tools, wedges, and crowbars, two and one half 

 of one cent per pound. 



Iron or steel axles, parts thereof, axle-bars, axle- 

 blanks, or forgings for axles, without reference to 

 the stage or state of manufacture, two and one half of 

 one cent per pound. 



Forgings of iron and steel, or forged iron, of what- 

 ever shape, or in whatever stage of manufacture, not 

 specially enumerated or provided for in this act, two 

 and one half cents per pound. 



Horseshoe-nails, hob-nails, and wire nails, and all 



