2894 



Chapter 23 



Kumar, V. B. 1958. [Investigations on thick- 

 ness variation in fiberboards.] Holz als Roh- 

 und Werkstoff 16(I0):371-377. 

 Lamarche, F. E. 1969. Preparation of pulp- 

 wood. In The pulping of wood. Vol. I, Pulp 

 and Paper Manufacture Series. 2nd ed. 

 McGraw-Hill, New York. 



Lampert, H. 1967. Faserplatten, VEB Fach- 

 buchverlag, Leipzig. 453 p. (Ger.) 



Leider, P. J. and J. Rihs. 1977. Understanding 

 the disk refiner. I. The hydraulic behavior. 

 Tappi 60(9):98-102. 



Lorenzini, E. M. 1971. Internal sizing with 

 wax sizes. In Internal sizing of paper and 

 paperboard. (J. W. Swanson, ed.) TAPPI 

 Monograph Series No. 33. 193 p. Tech. As- 

 soc. Pulp and Pap. Ind., New York. 



Lyall, K. N. 1969. Structural board. In Pulp 

 and paper Manufacture. Vol. II. McGraw- 

 Hill Book Company, New York. 



McMahon, I. J. [n.d.] The energy-efficient fi- 

 berboard dryer. The Coe Manufacturing 

 Co., Painesville, Ohio. 



McNatt, J. D. 1974. Effects of equilibrium 

 moisture content changes on hardboard 

 properties. For. Prod. J. 24(2):29-35. 



Maloney, T. M. 1977. Modem particleboard 

 and dry-process fiberboard manufacturing. 

 Miller Freeman Publications, San Francisco. 

 672 p. 



Mason, W. H. 1927. Pulp and board from 

 steam exploded wood. Pap. Trade J. 

 84(8):131-136. 



Mason, W. 1938. Making ligno-cellulose fiber 

 products. U.S. Pat. No. 2,120,137. U.S. 

 Pat. Off., Washington, D.C. 



Mihelich, W. G., D. J. Wild, S. B. Beaulieu, 

 and L. R. Beath. 1972. Single-stage chip 

 refining — some major operating parameters 

 and their effects on pulp chips. Pulp and 

 Pap. Mag. Can. 73(5):78-82. 



Morse, E. H. 1967. Washington Iron Works 

 presses. In Proc, Washington State Univ. 

 Particleboard Symp. 1:358-380. Washing- 

 ton State Univ., Pullman. 



Myers, G. C. 1977. How fiber acidity affected 

 functional properties of dry-formed hard- 

 boards. U.S. Dep. Agric. For. Serv., Res. 

 Pap. FPL 282. 8 p. 



Myers, G. C. and C. A. Holmes. 1975. Fire- 

 retardant treatments for dry-formed hard- 

 board. For. Prod. J. 25(l):20-28. 



Myers, G. C. and C. A. Holmes. 1977. A 

 commercial application of fire retardants to 

 dry-formed hardboards. U.S. Dep. Agric. 

 For. Serv., Res. Pap. FPL 298. 8 p. 



Nagy, V. 1964. Erkenninisse und Erfahrungen 

 auf dem Gebiet der Herstellung zqeiseitig 

 glatter Faserplatten nach dem Trockenver- 

 fahren ohne zusatzliche Bindemittel in der 

 CSSR. Holztechnologie 5(3): 147- 151. 



Norberg, K. G., and E. L. Back. 1968. Effect 

 of hot pressing temperature on the properties 

 of hard and semi-hard fibre building boards. 

 Studies in plane pressing. Svensk Papper- 

 stidning 71(21):774-787. 



Pecina, H. 1980. Der Einfluss einiger tech- 

 nologischer parameter auf die Bindung lig- 

 nozelluloser Fasem untereinander. Holz- 

 technologie 21(3): 147-153. 



Peters, T. E. 1968. The vacuum former. In 

 Proc, 2nd Washington State Univ. Symp. 

 on Particleboard, p. 375-382. Washington 

 State Univ., Pullman. 



Porter, R. B. 1971. Internal sizing with wax 

 sizes. In Internal sizing of paper and paper- 

 board. (J. W. Swanson, ed.) TAPPI Mono- 

 graph Series No. 33. 193 p. Tech. Assoc. 

 Pulp and Pap. Ind., New York. 



Raddin, H. A., and S. H. W. Brooks. 1965. 

 Method of making fiberboard. U.S. Pat. No. 

 3,207,819. U.S. Pat Off., Washington, 

 D.C. 



Rausendorf, D. 1963. [Technology of the dry 

 process for the production of hardboard and 

 its development in Japan.] Holz als Roh- und 

 Werkstoff 21 (6): 209-2 17. 



Robinson, J. G. 1959. Dry process hardboard. 

 For. Prod. J. 9(7):1 1A-14A. 



Sandermann, W., and O. Kunnemeyer. 1957. 

 [On dry and semi-dry fiberboards.] Holz als 

 Roh- und Werkstoff 15(1): 12- 18. 



Seborg, R. M., H. Tarkow, and A. J. Stamm. 

 1953. Effect of heat upon the dimensional 

 stabilization of wood. For. Prod. J. 3(3):59- 

 67. 



Short, M. B., and J. W. Rayfield. 1978. Meth- 

 od of impregnating wood with boric acid. 

 U.S. Pat. No. 4,076,871. 



Snodgrass, J. D., R. J. Saunders, and A. D. 

 Syska. 1973. Particleboard of aligned wood 

 strands. In Proc, 7th Washington State 

 Univ. Symp. on Particleboard, p. 415-448. 

 Washington State Univ., Pullman. 



Spalt, H. A. 1977. Chemical changes in wood 

 associated with wood fiberboard manufac- 

 ture. In Wood technology: Chemical as- 

 pects. (I. S. Goldstein, ed.) 372 p. Amer. 

 Chem. Soc, Washington, D.C. 



Stamm, A. J. 1964. Wood and cellulose sci- 

 ence. 549 p. New York, N.Y.: The Ronald 

 Press Co. 



