Fiberboards 



2895 



Steinmetz, P. E. and D. J. Fahey. 1968. Resin 

 treatments for improving dimensional stabil- 

 ity of structural fiberboard. For. Prod. J. 

 18(9):71-75. 



Strauss, R. W. 1970. Paper making machines: 

 the Fourdrinier. In Pulp and paper manufac- 

 ture. Vol. III. McGraw-Hill Book Com- 

 pany, New York. 



Suchsland, O. 1978. Medium density fiber- 

 board production possibilities in the Tennes- 

 see Valley Region. Process, markets, and 

 raw materials basis. TV A Tech. Note B29. 

 Tennessee Valley Authority, Norris, Tenn. 

 173 p. 



Suchsland, O., D. E. Lyon, and P. E. Short. 

 1978. Selected properties of commercial 

 medium density fiberboards. For. Prod. J. 

 28(9):45-49. 



Suchsland, O., and G. E. Woodson. 1974. Ef- 

 fect of press cycle variables on density gradi- 

 ent of medium-density fiberboard. In Proc, 

 8th Washington State Univ. Symp. on Parti- 

 cleboard, p. 375-396. Washington State 

 Univ., Pullman. 



Suchsland, O., and G. E. Woodson. 1985. Fi- 

 berboard manufacturing practices in the 

 United States, U.S. Dep. Agric. For. Serv., 

 Agric. Handb. 640. 



Swanson, J. W., R. W. Kumler, and R. G. 

 Misplay. 1971. The process of sizing. In 

 Internal sizing of paper and paperboard. 

 (J. W. Swanson, ed.) Tappi Monograph Ser. 

 No. 33. 193 p. Tech. Assoc. Pulp and Pap. 

 Ind., New York. 



Swiderski, J. 1963. [Evaluation of different 

 hardboard processes: Wet, semi-dry, and 

 dry process.] Holz als Roh- und Werkstoff 

 21(6):217-225. 



Talbott, J. W. 1974. Electrically aligned parti- 

 cleboard and fiberboard. In Proc. of eighth 

 Wa. State Univ. symp. on particleboard, pp. 

 153-182. Pullman, Wa.: Wa. State Univ. 



Talbott, J. W., and J. D. Logan. 1974. Method 

 of forming boards from particles. U.S. Pat. 

 No. 3,843,756. U.S. Pat. Off., Washing- 

 ton, D.C. 



TAPPI. 1971. An introduction to refining var- 

 iables. Tappi 54(10):1738-1741. 



Textor, C. K. 1957. The Bauer method of pre- 

 paring furnishes for the manufacture of insu- 

 lation board and hardboard. In FAO/ECE/ 

 Board Consulation. III. Paper 5.3. 



Uschmann, C. 1956. Fiber mat forming appa- 

 ratus and methods. U.S. Pat. 2,743,758. 

 U.S. Pat. Off., Washington, D.C. 



U.S. Department of Agriculture, Forest Ser- 

 vice. 1974. Wood handbook: Wood as an 

 engineering material. U.S. Dep. Agric. For. 

 Serv., Agric. Handb. 72, rev. For. Prod. 

 Lab., Madison, Wis. 



U.S. Department of Commerce. 1973a. Basic 

 hardboard. Voluntary Product Standard PS- 

 58-73. U.S. Dep. of Commerce, Natl. Bu- 

 reau of Standards, Washington, D.C. 



U.S. Department of Commerce. 1973b. Cellu- 

 losic fiber insulating board. Voluntary Prod- 

 uct Standard PS-57-73. U.S. Dep. 

 Commerce, Natl. Bureau of Standards, 

 Washington, D.C. 



U.S. Department of Commerce. 1973c. Prefin- 

 ished hardboard paneling. Voluntary Prod- 

 uct Standard PS-59-73. U.S. Dep. 

 Commerce, Natl. Bureau of Standards, 

 Gaithersburg, Md. 



U.S. Department of Commerce. 1973d. Hard- 

 board siding. Voluntary Product Standard 

 PS 60-73. U.S. Dep. Commerce, Natl. Bu- 

 reau of Standards, Gaithersburg, Md. 



U.S. Department of Commerce. 1980. Medi- 

 um density fiberboard for interior use. 

 Amer. Natl. Standard ANSI A 208.2-1980. 

 U.S. Dep. Commerce, Natl. Bureau of Stan- 

 dards, Gaithersburg, Md. 



U.S. Department of Commerce. 1982. Ameri- 

 can National Standard. Basic hardboard. 

 ANSI/ AH A A 135. 4 



U.S. Environmental Protection Agency. 1974. 

 Development document for proposed efflu- 

 ent limitations guidelines and new source 

 performance standards for the plywood, 

 hardboard, and wood preserving segment of 

 the timber products processing point source 

 category. EPA 440/1-74-023-a, U.S. Envi- 

 ronmental Protection Agency, Washington, 

 D.C. 325 p. 



U.S. Environmental Protection Agency. 1979. 

 Economic impact analysis of alternative pol- 

 lution control technologies. Wet process 

 hardboard and insulation board subcategor- 

 ies of the timber products industry. EPA 

 440/2-79-017, U.S. Environmental Protec- 

 tion Agency, Washington, D.C. 88 p. 



Vajda, P. 1976. A comparative evaluation of 

 the economics of wood-based panel indus- 

 tries. In Proc, FAO World Consultation on 

 Wood-Based Panels, New Delhi, India, 

 Feb. 1975. Miller Freeman Publications, 

 Brussels. 442 p. 



vanHullen, K. 1966. Vorpressen, Befeuchten, 

 Pressen. In Holzspanwerkstoffe. (F. Koll- 

 mann, ed.) Springer. 



